> -----Original Message-----
> From: York Sun
> Sent: Thursday, October 05, 2017 8:30 PM
> To: Rajesh Bhagat <rajesh.bha...@nxp.com>; u-boot@lists.denx.de
> Cc: Bhaskar Upadhaya <bhaskar.upadh...@nxp.com>
> Subject: Re: [PATCH v2] arm64: ls1012afrdm: Add distro boot support
> 
> On 10/05/2017 01:47 AM, Rajesh Bhagat wrote:
> > Include common config_distro_defaults.h and config_distro_bootcmd.h
> > for u-boot enviroments to support automatical distro boot which scan
> > boot.scr from external storage devices(e.g. SD and USB) and execute
> > autoboot script.
> >
> > Signed-off-by: Bhaskar Upadhaya <bhaskar.upadh...@nxp.com>
> > Signed-off-by: Rajesh Bhagat <rajesh.bha...@nxp.com>
> > ---
> > Depends on:
> > https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fpatch%2F808617%2F&data=01%7C01%7Cyork.sun%40nxp.com
> >
> %7C83457d3a96b74d7dd33d08d50bcdb2c9%7C686ea1d3bc2b4c6fa92cd99c5c301635
> >
> %7C0&sdata=sKmaJpoaeK1JXMf%2F%2Ba%2BPlUQtY3HumeB08I6MKTWchzc%3D&re
> serv
> > ed=0
> >
> > Changes in v2:
> >  - Removed the extra "\" character from macro definition
> >  - Dropped the #if for CONFIG_BOOTCOMMAND
> >
> >  configs/ls1012afrdm_qspi_defconfig |  1 +
> >  include/configs/ls1012afrdm.h      | 57
> ++++++++++++++++++++++++++++++++------
> >  2 files changed, 49 insertions(+), 9 deletions(-)
> >
> > diff --git a/configs/ls1012afrdm_qspi_defconfig
> > b/configs/ls1012afrdm_qspi_defconfig
> > index fe95f04..42acff0 100644
> > --- a/configs/ls1012afrdm_qspi_defconfig
> > +++ b/configs/ls1012afrdm_qspi_defconfig
> > @@ -46,3 +46,4 @@ CONFIG_DM_USB=y
> >  CONFIG_USB_XHCI_HCD=y
> >  CONFIG_USB_XHCI_DWC3=y
> >  CONFIG_USB_STORAGE=y
> > +CONFIG_DISTRO_DEFAULTS=y
> > diff --git a/include/configs/ls1012afrdm.h
> > b/include/configs/ls1012afrdm.h index 6b1ba57..4d6448b 100644
> > --- a/include/configs/ls1012afrdm.h
> > +++ b/include/configs/ls1012afrdm.h
> > @@ -20,16 +20,55 @@
> >  #define CONFIG_SYS_MEMTEST_START   0x80000000
> >  #define CONFIG_SYS_MEMTEST_END             0x9fffffff
> >
> > +#ifndef CONFIG_SPL_BUILD
> > +#undef BOOT_TARGET_DEVICES
> > +#define BOOT_TARGET_DEVICES(func) \
> > +   func(USB, usb, 0)
> > +#endif
> > +
> >  #undef CONFIG_EXTRA_ENV_SETTINGS
> > -#define CONFIG_EXTRA_ENV_SETTINGS              \
> > -       "verify=no\0"                           \
> > -       "loadaddr=0x80100000\0"                 \
> > -       "kernel_addr=0x100000\0"                \
> > -       "fdt_high=0xffffffffffffffff\0"         \
> > -       "initrd_high=0xffffffffffffffff\0"      \
> > -       "kernel_start=0xa00000\0"               \
> > -       "kernel_load=0x96000000\0"              \
> > -       "kernel_size=0x2800000\0"
> > +#define CONFIG_EXTRA_ENV_SETTINGS          \
> > +   "verify=no\0"                           \
> > +   "fdt_high=0xffffffffffffffff\0"         \
> > +   "initrd_high=0xffffffffffffffff\0"      \
> > +   "fdt_addr=0x00f00000\0"                 \
> > +   "kernel_addr=0x01000000\0"              \
> > +   "scriptaddr=0x80000000\0"               \
> > +   "fdtheader_addr_r=0x80100000\0"         \
> > +   "kernelheader_addr_r=0x80200000\0"      \
> > +   "kernel_addr_r=0x96000000\0"            \
> > +   "fdt_addr_r=0x90000000\0"               \
> > +   "load_addr=0x96000000\0"                \
> > +   "kernel_size=0x2800000\0"               \
> > +   "console=ttyS0,115200\0"                \
> > +   BOOTENV                                 \
> > +   "boot_scripts=ls1012afrdm_boot.scr\0"   \
> > +   "scan_dev_for_boot_part="               \
> > +        "part list ${devtype} ${devnum} devplist; "        \
> > +        "env exists devplist || setenv devplist 1; "       \
> > +        "for distro_bootpart in ${devplist}; do "          \
> > +             "if fstype ${devtype} "                       \
> > +                 "${devnum}:${distro_bootpart} "           \
> > +                 "bootfstype; then "                       \
> > +                 "run scan_dev_for_boot; " \
> > +             "fi; "                        \
> > +         "done\0"                          \
> > +   "scan_dev_for_boot="                              \
> > +           "echo Scanning ${devtype} "               \
> > +                           "${devnum}:${distro_bootpart}...; "  \
> > +           "for prefix in ${boot_prefixes}; do "     \
> > +                   "run scan_dev_for_scripts; "      \
> > +           "done;"                                   \
> > +           "\0"                                      \
> > +   "installer=load usb 0:2 $load_addr "    \
> > +              "/flex_installer_arm64.itb; "        \
> > +              "bootm $load_addr#$board\0"  \
> > +   "qspi_bootcmd=echo Trying load from qspi..;"    \
> > +           "sf probe && sf read $load_addr "       \
> > +           "$kernel_addr $kernel_size && bootm $load_addr#$board\0"
> > +
> 
> http://patchwork.ozlabs.org/patch/808617/ changes CONFIG_EXTRA_ENV_SETTINGS
> which you just redefined. Do you really depend on that patch? That patch 
> needs an
> update.
> 

Yes, this patch depends on below patch as that changes CONFIG_ENV_OFFSET 
which is required for distro boot. 

http://patchwork.ozlabs.org/patch/808617/

> York

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to