From: Patrice Chotard <[email protected]> Fix bit 2 name of PWR_CR3 register to match with the last STM32H7 reference manual available here :
http://www.st.com/content/st_com/en/support/resources/ resource-selector.html?querycriteria=productId=SS1951$$ resourceCategory=technical_literature$$resourceType=reference_manual Update also comment about voltage scaling 1 values Signed-off-by: Patrice Chotard <[email protected]> --- drivers/clk/clk_stm32h7.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/clk/clk_stm32h7.c b/drivers/clk/clk_stm32h7.c index 9ca497a..ffa902d 100644 --- a/drivers/clk/clk_stm32h7.c +++ b/drivers/clk/clk_stm32h7.c @@ -109,7 +109,7 @@ DECLARE_GLOBAL_DATA_PTR; #define QSPISRC_PER_CK 3 #define PWR_CR3 0x0c -#define PWR_CR3_SDEN BIT(2) +#define PWR_CR3_SCUEN BIT(2) #define PWR_D3CR 0x18 #define PWR_D3CR_VOS_MASK GENMASK(15, 14) #define PWR_D3CR_VOS_SHIFT 14 @@ -361,11 +361,11 @@ int configure_clocks(struct udevice *dev) writel(0x0, ®s->d2ccip1r); writel(0x0, ®s->d2ccip2r); - /* Set voltage scaling at scale 1 */ + /* Set voltage scaling at scale 1 (1,15 - 1,26 Volts) */ clrsetbits_le32(pwr_base + PWR_D3CR, PWR_D3CR_VOS_MASK, VOS_SCALE_1 << PWR_D3CR_VOS_SHIFT); - /* disable step down converter */ - clrbits_le32(pwr_base + PWR_CR3, PWR_CR3_SDEN); + /* Lock supply configuration update */ + clrbits_le32(pwr_base + PWR_CR3, PWR_CR3_SCUEN); while (!(readl(pwr_base + PWR_D3CR) & PWR_D3CR_VOSREADY)) ; -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
