On Wed, Oct 11, 2017 at 11:23 AM, Fabio Estevam <fabio.este...@nxp.com> wrote: > Since U-Boot 2017.09 it is no longer possible to boot a kernel from SD > card: > > U-Boot 2017.11-rc1-00149-g38c8107-dirty (Oct 11 2017 - 09:55:22 -0300) > > CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) > CPU: Commercial temperature grade (0C to 95C) at 35C > Reset cause: POR > Model: Freescale i.MX7 SabreSD Board > Board: i.MX7D SABRESD in non-secure mode > DRAM: 1 GiB > MMC: MMC/SD: Reset never completed. > > MMC Device 0 not found > *** Warning - No MMC card found, using default environment > > While a proper fix is not available, remove CONFIG_DM_MMC and register > the USDHC1 port in the old way, so that this board can boot a kernel > again. > > Signed-off-by: Fabio Estevam <fabio.este...@nxp.com>
I understand your goal but I think we ought to focus on fixing the root cause of it instead of moving things back out of DM. I even think we could postpone a little the release until a fix is made but revert out from DM seems wrong. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot