Hi Fabio, On 12/10/2017 18:27, Fabio Estevam wrote: > Hi Stefano, > > On Sun, Oct 1, 2017 at 4:23 PM, Fabio Estevam <[email protected]> wrote: >> From: Fabio Estevam <[email protected]> >> >> Commit 001cdbbb32ef1f6 ("imx: mx6slevk: enable more DM drivers") breaks >> MMC support in U-Boot proper on the mx6slevk_spl_defconfig target: >> >> U-Boot SPL 2017.09-00396-g6ca43a5 (Oct 01 2017 - 16:20:18) >> Trying to boot from MMC1 >> >> U-Boot 2017.09-00396-g6ca43a5 (Oct 01 2017 - 16:20:18 -0300) >> >> CPU: Freescale i.MX6SL rev1.0 792 MHz (running at 396 MHz) >> CPU: Commercial temperature grade (0C to 95C) at 33C >> Reset cause: POR >> Board: MX6SLEVK >> I2C: ready >> DRAM: 1 GiB >> MMC: FSL_SDHC: 0 >> MMC Device 1 not found >> *** Warning - No MMC card found, using default environment >> >> Fix this by re-introducing the U-Boot proper mmc init code inside >> board_mmc_init(). >> >> Signed-off-by: Fabio Estevam <[email protected]> > > Please disregard this patch and others I sent related to the MMC > breakage. We are discussing in another thread a more generic way to > fix these problems. >
Yes, I dropped this and "mx6slevk: Remove some DM drivers". They won't be merged. Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
