From: Tien Fong Chee <tien.fong.c...@intel.com>
This patch adds description on properties about location of FPGA RBFs are
stored, type and functionality of RBF used to configure FPGA.
Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
---
doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
b/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
index 2fd8e7a..47c695b 100644
--- a/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
+++ b/doc/device-tree-bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
@@ -7,6 +7,14 @@ Required properties:
- The second index is for writing FPGA configuration data.
- resets : Phandle and reset specifier for the device's reset.
- clocks : Clocks used by the device.
+- altr,bitstream_periph : FPGA peripheral raw binary file which is used to
+ initialize FPGA IOs, PLL, IO48 and DDR.
+- altr,bitstream_core : FPGA core raw binary file contains FPGA design which is
+ used to program FPGA CRAM and ERAM.
+- altr,bitstream_devpart : Partition of flash device where bitstream files are
+ stored.
+ <dev[:part]> - dev is flash device number, part is
+ flash device partition.
Example:
@@ -16,4 +24,7 @@ Example:
0xffcfe400 0x20>;
clocks = <&l4_mp_clk>;
resets = <&rst FPGAMGR_RESET>;
+ altr,bitstream_periph = "ghrd_10as066n2.periph.rbf.mkimage";
+ altr,bitstream_core = "ghrd_10as066n2.core.rbf.mkimage";
+ altr,bitstream_devpart = "0:1";
};
--
2.2.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
