Hello Fabio, On 10/20/2017 01:41 PM, Fabio Estevam wrote: > When CONFIG_DM_MMC=y, CONFIG_BLK should be selected, otherwise the > SD/eMMC card cannot be used. > > Also, select CONFIG_DM_USB=y when CONFIG_USB=y to avoid build failure. > > Tested on mx6slevk, mx7dsabresd and mx6ullevk. > > Signed-off-by: Fabio Estevam <fabio.este...@nxp.com> > --- > Changes since v1: > - Cover all imx boards > > configs/imx6q_logic_defconfig | 1 - > configs/imx6qdl_icore_nand_defconfig | 1 - > configs/imx6ul_geam_mmc_defconfig | 1 - > configs/imx6ul_geam_nand_defconfig | 1 - > configs/imx6ul_isiot_emmc_defconfig | 1 - > configs/imx6ul_isiot_mmc_defconfig | 1 - > configs/imx6ul_isiot_nand_defconfig | 1 - > configs/mx6slevk_defconfig | 2 +- > configs/mx6slevk_spinor_defconfig | 2 +- > configs/mx6sllevk_defconfig | 1 - > configs/mx6sllevk_plugin_defconfig | 1 - > configs/mx6sxsabreauto_defconfig | 2 +- > configs/mx6ull_14x14_evk_defconfig | 1 - > configs/mx6ull_14x14_evk_plugin_defconfig | 1 - > configs/mx7dsabresd_defconfig | 1 - > configs/mx7dsabresd_secure_defconfig | 1 - > configs/mx7ulp_evk_defconfig | 1 - > configs/mx7ulp_evk_plugin_defconfig | 1 - > configs/opos6uldev_defconfig | 1 - > 19 files changed, 3 insertions(+), 19 deletions(-) >
The compilation fails for the opos6uldev board. The following change is needed to fix it: diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index d018984..04fc602 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -17,6 +17,7 @@ #ifdef CONFIG_SPL_BUILD #undef CONFIG_DM_GPIO #undef CONFIG_DM_MMC +#undef CONFIG_BLK #define CONFIG_MXC_UART_BASE UART1_BASE #endif Otherwise, your change fixes the eMMC on the board. Tested-by: Sébastien Szymanski <sebastien.szyman...@armadeus.com> Thanks. Regards, -- Sébastien Szymanski Software engineer, Armadeus Systems Tel: +33 (0)9 72 29 41 44 Fax: +33 (0)9 72 28 79 26 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot