On 10/23/2017 01:53 PM, York Sun wrote: > On 09/14/2017 02:26 PM, York Sun wrote: >> On 08/30/2017 03:43 AM, Shengzhou Liu wrote: >>> Signed-off-by: Shengzhou Liu <shengzhou....@nxp.com> >>> --- >>> include/configs/ls1043a_common.h | 11 ++++++++++- >>> 1 file changed, 10 insertions(+), 1 deletion(-) >>> >>> diff --git a/include/configs/ls1043a_common.h >>> b/include/configs/ls1043a_common.h >>> index f064d5c24a..976c031574 100644 >>> --- a/include/configs/ls1043a_common.h >>> +++ b/include/configs/ls1043a_common.h >>> @@ -281,6 +281,8 @@ >>> "fdt_addr_r=0x90000000\0" \ >>> "load_addr=0xa0000000\0" \ >>> "kernel_size=0x2800000\0" \ >>> + "kernel_addr_sd=0x8000\0" \ >>> + "kernel_size_sd=0x14000\0" \ >>> "console=ttyS0,115200\0" \ >>> "mtdparts=" MTDPARTS_DEFAULT "\0" \ >>> BOOTENV \ >>> @@ -318,12 +320,19 @@ >>> "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \ >>> "nor_bootcmd=echo Trying load from nor..;" \ >>> "cp.b $kernel_addr $load_addr " \ >>> - "$kernel_size && bootm $load_addr#$board\0" >>> + "$kernel_size && bootm $load_addr#$board\0" \ >>> + "sd_bootcmd=echo Trying load from SD ..;" \ >>> + "mmcinfo; mmc read $load_addr " \ >>> + "$kernel_addr_sd $kernel_size_sd ;" \ >>> + " bootm $load_addr#$board\0" >>> >> >> Shouldn't you be using "&&" instead of ";" between commands? >> > > Shengzhou, > > Are you going to update the patches?
Mingkai, Do you need this change for LS1043ARDB? Please respond to my comment if so. Otherwise, I will drop this set. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
