Rockchip use a 'loader2' partition for U-Boot, so u-boot.bin or u-boot.itb load by SPL need to locate at0x4000. Detail here: http://opensource.rock-chips.com/wiki_Boot_option
Signed-off-by: Kever Yang <[email protected]> --- common/spl/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 0bd8370..e987c07 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -142,11 +142,12 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR default 0x50 if ARCH_SUNXI default 0x75 if ARCH_DAVINCI default 0x8a if ARCH_MX6 - default 0x100 if ARCH_ROCKCHIP || ARCH_UNIPHIER + default 0x100 if ARCH_UNIPHIER default 0x140 if ARCH_MVEBU default 0x200 if ARCH_SOCFPGA || ARCH_AT91 default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \ OMAP54XX || AM33XX || AM43XX + default 0x4000 if ARCH_ROCKCHIP help Address on the MMC to load U-Boot from, when the MMC is being used in raw mode. Units: MMC sectors (1 sector = 512 bytes). -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
