--- On Wed, 12/23/09, Bill Cook <[email protected]> wrote: > of the SICRL register. The definition in mpc83xx.h for > SICRL_USBDR is > 0x00000C00 which seems to be a mask telling which bits > control that pin. > However, when used in MPC8313ERDB.h and SIMPC8313.h board > configurations > (and hence my configuration), it is or'd into the > definition of > SICRL. The problem is that according to the reference > manual setting both > bits > in this field is undefined.
I, like you followed the MPC8313ERDB.h config file. However, I have not seen the problems your are seeing. Then again, I am probably not testing the USB as vigorously as you are. In the coming weeks I will be. > So the question, are the #defines in mpc83xx.h meant to be > bit masks? I think that's what was intended since there are two bits for most configurations of SICRL fields and only one #define, not 4. > Alternatively, the board configuration files should be > updated to set this > field > correctly. Will take care of mine after a consensus is reached. Ron Madrid _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
