On Thu, 2017-11-09 at 11:19 +0100, Lukasz Majewski wrote: > Hi Martyn, > > > *** Resend due to previous use of unsubscribed email address *** > > Just a small remark. > > You may consider using patman to get the list of u-boot community peers > to be CC'ed for your patch. Or at least look for a custodian (in > MAINTAINERS) responsible to IMX (NXP) SoC part of u-boot (in this case > Stefano Babic or Fabio Estevam). >
Ah, OK, I ran get_maintainers and CCed anyone specifically flagged as a maintainer (which is what I understood to be good practice from the U-Boot wiki). I'll bear this in mind and CC those that have made significant contributions next time. > The problem with sending code only to u-boot ML is that it may be > overlooked by people, who are the best candidates to review it. > > > > > This series adds support for the GE PPD. The initial patches in this > > series resolve issues found during development and testing, extend > > existing support and add new support for devices in the PPD. The final > > patch in the series adds the board support for the PPD. > > > > Ian Ray (2): > > ext4: recover from filesystem corruption when reading > > bootcount: add support for bootcounter on EXT filesystem > > > > Martyn Welch (3): > > pwm: imx: Enable PWM support on i.MX53 > > arm: mx5: Add more register definitions > > board: ge: make VPD code common > > > > Nandor Han (2): > > imx: mxc_i2c: tweak the i2c transfer method > > rtc: add support for s35392a > > > > Peter Senna Tschudin (1): > > mx53: Add Board support for GE PPD > > > > README | 7 + > > arch/arm/include/asm/arch-mx5/crm_regs.h | 8 + > > arch/arm/include/asm/arch-mx5/imx-regs.h | 50 ++++ > > arch/arm/mach-imx/mx5/Kconfig | 7 + > > board/ge/bx50v3/Makefile | 2 +- > > board/ge/bx50v3/bx50v3.c | 2 +- > > board/ge/bx50v3/vpd_reader.c | 228 --------------- > > board/ge/bx50v3/vpd_reader.h | 25 -- > > board/ge/common/Makefile | 7 + > > board/ge/common/vpd_reader.c | 197 +++++++++++++ > > board/ge/common/vpd_reader.h | 17 ++ > > board/ge/mx53ppd/Kconfig | 17 ++ > > board/ge/mx53ppd/MAINTAINERS | 7 + > > board/ge/mx53ppd/Makefile | 12 + > > board/ge/mx53ppd/imximage.cfg | 87 ++++++ > > board/ge/mx53ppd/mx53ppd.c | 457 > > +++++++++++++++++++++++++++++++ > > board/ge/mx53ppd/mx53ppd_video.c | 135 +++++++++ > > board/ge/mx53ppd/ppd_gpio.h | 96 +++++++ > > configs/mx53ppd_defconfig | 39 +++ > > drivers/Kconfig | 2 + > > drivers/bootcount/Kconfig | 58 ++++ > > drivers/bootcount/Makefile | 1 + > > drivers/bootcount/bootcount_ext.c | 62 +++++ > > drivers/i2c/mxc_i2c.c | 25 +- > > drivers/pwm/pwm-imx-util.c | 2 + > > drivers/rtc/Kconfig | 6 + > > drivers/rtc/Makefile | 1 + > > drivers/rtc/s35392a.c | 365 > > ++++++++++++++++++++++++ fs/ext4/ext4_common.c | > > 10 + fs/ext4/ext4fs.c | 10 +- > > include/configs/mx53ppd.h | 248 +++++++++++++++++ > > lib/Kconfig | 3 + 32 files changed, > > 1927 insertions(+), 266 deletions(-) delete mode 100644 > > board/ge/bx50v3/vpd_reader.c delete mode 100644 > > board/ge/bx50v3/vpd_reader.h create mode 100644 > > board/ge/common/Makefile create mode 100644 > > board/ge/common/vpd_reader.c create mode 100644 > > board/ge/common/vpd_reader.h create mode 100644 > > board/ge/mx53ppd/Kconfig create mode 100644 > > board/ge/mx53ppd/MAINTAINERS create mode 100644 > > board/ge/mx53ppd/Makefile create mode 100644 > > board/ge/mx53ppd/imximage.cfg create mode 100644 > > board/ge/mx53ppd/mx53ppd.c create mode 100644 > > board/ge/mx53ppd/mx53ppd_video.c create mode 100644 > > board/ge/mx53ppd/ppd_gpio.h create mode 100644 > > configs/mx53ppd_defconfig create mode 100644 drivers/bootcount/Kconfig > > create mode 100644 drivers/bootcount/bootcount_ext.c > > create mode 100644 drivers/rtc/s35392a.c > > create mode 100644 include/configs/mx53ppd.h > > > > > > Best regards, > > Lukasz Majewski > > -- > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot