Dear "Doug Warner", In message <[email protected]> you wrote: > > Hyperterm screen output of the failed boot process, which is in an endless > loop of getting a Machine check in kernel mode error when reaching the NAND > portion of the boot process is pasted below.
You have a crashing board, so the natural thing seems to be to analyze the crash and try to understand what it means. > Reset Status: Software Hard, External/Internal Soft, External/Internal Hard > > CPU: e300c3, MPC8313EA, Rev: 2.0 at 333.333 MHz, CSB: 166.667 MHz > Board: Freescale MPC8313ERDB > I2C: ready > DRAM: 128 MB > FLASH: 8 MB > NAND: Machine check in kernel mode. > Caused by (from msr): regs 07f35dd8 Unknown values in msr > NIP: 07FD6E80 XER: 20000000 LR: 07FD7798 REGS: 07f35dd8 TRAP: 0200 DAR: > 00000000 The Next Instruction Pointer is at 07FD6E80 - which code is it pointing to, i. e. where exactly did your code crash? > Call backtrace: > BFFFFFFF 07FC9D60 07FC3BDC 07FBC888 07FBB5F0 There is a nice backtrace - which addresses in your code do these resolve to? And why don't you attach a debugger and debug the code? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] "Bureaucracy is the enemy of innovation." - Mark Shepherd, former President and CEO of Texas Instruments _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
