Add a document to describe Andestech atcpit100 timer and
binding information.

Signed-off-by: rick <r...@andestech.com>
Signed-off-by: Rick Chen <rickche...@gmail.com>
Reviewed-by: Simon Glass <s...@chromium.org>
---
 doc/device-tree-bindings/timer/atcpit100_timer.txt | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 doc/device-tree-bindings/timer/atcpit100_timer.txt

diff --git a/doc/device-tree-bindings/timer/atcpit100_timer.txt 
b/doc/device-tree-bindings/timer/atcpit100_timer.txt
new file mode 100644
index 0000000..620814e
--- /dev/null
+++ b/doc/device-tree-bindings/timer/atcpit100_timer.txt
@@ -0,0 +1,31 @@
+Andestech ATCPIT100 timer
+------------------------------------------------------------------
+ATCPIT100 is a generic IP block from Andes Technology, embedded in
+Andestech AE3XX, AE250 platforms and other designs.
+
+This timer is a set of compact multi-function timers, which can be
+used as pulse width modulators (PWM) as well as simple timers.
+
+It supports up to 4 PIT channels. Each PIT channel is a
+multi-function timer and provide the following usage scenarios:
+One 32-bit timer
+Two 16-bit timers
+Four 8-bit timers
+One 16-bit PWM
+One 16-bit timer and one 8-bit PWM
+Two 8-bit timer and one 8-bit PWM
+
+Required properties:
+- compatible   : Should be "andestech,atcpit100"
+- reg          : Address and length of the register set
+- interrupts   : Reference to the timer interrupt
+- clock-frequency : The rate in HZ in input of the Andestech ATCPIT100 timer
+
+Examples:
+
+timer0: timer@f0400000 {
+       compatible = "andestech,atcpit100";
+       reg = <0xf0400000 0x1000>;
+       interrupts = <2 4>;
+       clock-frequency = <30000000>;
+}:
-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to