Sata registers PP2C and PP3C are used to control the configuration of the PHY control OOB timing for the COMINIT/COMWAKE parameters respectively. Calculate those parameters from port clock frequency. Overwrite those registers with calculated values to get better OOB timing.
Signed-off-by: Tang Yuantian <[email protected]> --- v2: - refine the commit message and title arch/arm/cpu/armv8/fsl-layerscape/soc.c | 6 ++++++ arch/arm/include/asm/arch-fsl-layerscape/soc.h | 2 ++ 2 files changed, 8 insertions(+) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 497a4b541d..b52653929c 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -328,6 +328,8 @@ int sata_init(void) #ifdef CONFIG_SYS_SATA2 ccsr_ahci = (void *)CONFIG_SYS_SATA2; out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); + out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG); + out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG); out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); #endif @@ -335,6 +337,8 @@ int sata_init(void) #ifdef CONFIG_SYS_SATA1 ccsr_ahci = (void *)CONFIG_SYS_SATA1; out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); + out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG); + out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG); out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); @@ -355,6 +359,8 @@ int sata_init(void) /* Disable SATA ECC */ out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000); out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG); + out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG); + out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG); out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG); out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG); diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index 247f09e0f5..664d847e9c 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -88,6 +88,8 @@ struct cpu_type { /* ahci port register default value */ #define AHCI_PORT_PHY_1_CFG 0xa003fffe +#define AHCI_PORT_PHY2_CFG 0x28184d1f +#define AHCI_PORT_PHY3_CFG 0x0e081509 #define AHCI_PORT_TRANS_CFG 0x08000029 #define AHCI_PORT_AXICC_CFG 0x3fffffff -- 2.14.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
