On Tue, Dec 12, 2017 at 02:20:17PM +0530, Jagan Teki wrote: > On Tue, Dec 12, 2017 at 1:28 PM, Maxime Ripard > <[email protected]> wrote: > > Hi, > > > > On Tue, Dec 12, 2017 at 12:28:16PM +0530, Jagan Teki wrote: > >> AXP803 another PMIC produced by x-powers and paired with > >> A64 via RSB bus. > >> > >> unlike other axp chip's support in SPL this is only added > >> for U-Boot proper since SPL on A64 has no space to add anything. > > > > How do you setup the CPU and DRAM regulators then? > > > >> Signed-off-by: Jagan Teki <[email protected]> > >> --- > >> arch/arm/mach-sunxi/Makefile | 9 ++ > >> arch/arm/mach-sunxi/pmic_bus.c | 9 +- > >> arch/arm/mach-sunxi/rsb.c | 2 +- > >> board/sunxi/board.c | 40 +++++++ > >> drivers/power/Kconfig | 95 ++++++++++----- > >> drivers/power/Makefile | 3 + > >> drivers/power/axp803.c | 260 > >> +++++++++++++++++++++++++++++++++++++++++ > >> include/axp803.h | 68 +++++++++++ > >> include/axp_pmic.h | 4 + > >> 9 files changed, 458 insertions(+), 32 deletions(-) > >> create mode 100644 drivers/power/axp803.c > >> create mode 100644 include/axp803.h > >> > >> diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile > >> index 2a3c379..aedf22f 100644 > >> --- a/arch/arm/mach-sunxi/Makefile > >> +++ b/arch/arm/mach-sunxi/Makefile > >> @@ -19,9 +19,15 @@ endif > >> obj-$(CONFIG_MACH_SUN6I) += prcm.o > >> obj-$(CONFIG_MACH_SUN8I) += prcm.o > >> obj-$(CONFIG_MACH_SUN9I) += prcm.o > >> +ifndef CONFIG_SPL_BUILD > >> +obj-$(CONFIG_MACH_SUN50I) += prcm.o > >> +endif > > > > The number of lines here is starting to be a bit ridiculous, please > > make a Kconfig option selected by the SoC families. > > as of now there was no Kconfig option for prcm,
This is my point, you should add it :) Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
