Hi Martin, On Mon, Dec 18, 2017 at 8:35 AM, Martin Husemann <[email protected]> wrote: > I tested the RAM version now and indeed it does not work either. > > With my old u-boot I get: > > U-Boot 2013.10 (Oct 21 2013 - 20:54:41) > Marvell-GuruPlug > > SoC: Kirkwood 88F6281_A1 > DRAM: 512 MiB > WARNING: Caches not enabled > NAND: 512 MiB > In: serial > Out: serial > Err: serial > Net: egiga0, egiga1 > Warning: failed to set MAC address > > 88E1121 Initialized on egiga0 > 88E1121 Initialized on egiga1 > Hit any key to stop autoboot: 3 > > > while the new one: > > U-Boot 2017.11 (Dec 05 2017 - 14:52:54 +0100) > Marvell-GuruPlug > > SoC: Kirkwood 88F6281_A1 > DRAM: 512 MiB > WARNING: Caches not enabled > NAND: <--- hangs here > > > Anyone got an idea where to look? >
I've got a couple of out-of-tree boards using Kirkwood SoCs (or equivalent integrated). One even uses NAND. I've just tried that board on top of 2017.11 and it boots and detects NAND (at least when loaded into RAM). I can't try u-boot/master because I haven't got myself a gcc > 6 toolchain yet. In terms of differences between configs between my board and guruplug I don't see anything that stands out. _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
