Hi Andre,
On 3 December 2017 at 19:05, Andre Przywara <andre.przyw...@arm.com> wrote:
> The DT spec demands a unit-address in a node name to match the "reg"
> property in that node. Newer dtc versions will throw warnings if this is
> not the case.
> Adjust the FIT build script for 64-bit Allwinner boards to remove the
> bogus addresses from the node names and avoid the warnings.
> This avoids a warning with recent versions of the dtc tool.
>
> Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
> ---
> board/sunxi/mksunxi_fit_atf.sh | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/board/sunxi/mksunxi_fit_atf.sh b/board/sunxi/mksunxi_fit_atf.sh
> index b1d6e0e16a..36abe9efed 100755
> --- a/board/sunxi/mksunxi_fit_atf.sh
> +++ b/board/sunxi/mksunxi_fit_atf.sh
> @@ -21,7 +21,7 @@ cat << __HEADER_EOF
> #address-cells = <1>;
>
> images {
> - uboot@1 {
> + uboot {
> description = "U-Boot (64-bit)";
> data = /incbin/("u-boot-nodtb.bin");
> type = "standalone";
> @@ -29,7 +29,7 @@ cat << __HEADER_EOF
> compression = "none";
> load = <0x4a000000>;
> };
> - atf@1 {
> + atf {
> description = "ARM Trusted Firmware";
> data = /incbin/("$BL31");
> type = "firmware";
> @@ -44,7 +44,7 @@ cnt=1
> for dtname in $*
> do
> cat << __FDT_IMAGE_EOF
> - fdt@$cnt {
> + fdt_$cnt {
> description = "$(basename $dtname .dtb)";
> data = /incbin/("$dtname");
> type = "flat_dt";
> @@ -57,7 +57,7 @@ done
> cat << __CONF_HEADER_EOF
> };
> configurations {
> - default = "config@1";
> + default = "config_1";
Have you changed from hyphen to underscore here?
>
> __CONF_HEADER_EOF
>
> @@ -65,11 +65,11 @@ cnt=1
> for dtname in $*
> do
> cat << __CONF_SECTION_EOF
> - config@$cnt {
> + config_$cnt {
> description = "$(basename $dtname .dtb)";
> - firmware = "uboot@1";
> - loadables = "atf@1";
> - fdt = "fdt@$cnt";
> + firmware = "uboot";
> + loadables = "atf";
> + fdt = "fdt_$cnt";
> };
> __CONF_SECTION_EOF
> cnt=$((cnt+1))
> --
> 2.14.1
>
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
