On 19/12/17 13:51, Maxime Ripard wrote:
On Tue, Dec 19, 2017 at 05:12:00PM +0530, Jagan Teki wrote:
On Wed, Dec 13, 2017 at 2:16 PM, Andre Heider <[email protected]> wrote:
fdt overlay support is useful for all sunxi boards, enable per default
and remove it from sunxi defconfigs.
Signed-off-by: Andre Heider <[email protected]>
---
Hi,
there're way too many sunxi boards so I'm not 100% sure this is the best
approach...
Are there boards where enabling this is definitely not desired?
Thanks,
Andre
arch/arm/Kconfig | 1 +
configs/CHIP_defconfig | 1 -
configs/CHIP_pro_defconfig | 1 -
3 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 73909952d0..25847b3aa1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -715,6 +715,7 @@ config ARCH_SUNXI
select USE_TINY_PRINTF
imply CMD_GPT
imply FAT_WRITE
+ imply OF_LIBFDT_OVERLAY
It's increasing u-boot.itb size to 512KB (which is 508K earlier) and
in either case the size moves on env side where env start 0x88000
(504KB)
Right, so maybe we can make that conditional to ARM?
Maxime
From the 'we're out of space' thread:
...
> So, with FIT_ENABLE_SHA256_SUPPORT, LZMADEC, ISO_PARTITION and the
> overlay support, we're at 500kB.
>
> Again, tight, but under the limit.
...
If I understood correctly the issue will be solved without any requiring
changes to this patch.
Let me know if that is not the case.
Thanks,
Andre
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
