Hi All, I have a SMDKC100 boards with Single chip NAND
Built the mainline uboot for Das U-Boot# smdkc100_config; make i use a In-Circuit Debugger to flash the uboot.bin to the NAND. I checked the dip switches & Jumpers are proper. The In-Circuit Debugger shows "Emulation running" But, nothing comes up on the UART0 What could be the problem, Any pointers.. -- Shine bright, (: Naveen Krishna Ch :)
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
