The current flow of authenticate_image() will print the HAB event log even if we reject an element of the IVT header before ever calling into the ROM. This can be confusing.
This patch changes the flow of the code so that the HAB event log is only printed out if we have called into the ROM and received some sort of status code. Signed-off-by: Bryan O'Donoghue <[email protected]> Suggested-by: Cc: Breno Matheus Lima <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Peng Fan <[email protected]> Cc: Albert Aribaud <[email protected]> Cc: Sven Ebenfeld <[email protected]> Cc: George McCollister <[email protected]> --- arch/arm/mach-imx/hab.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c index 92d342b..d574f2e 100644 --- a/arch/arm/mach-imx/hab.c +++ b/arch/arm/mach-imx/hab.c @@ -478,14 +478,14 @@ int authenticate_image(uint32_t ddr_start, uint32_t image_size, if (hab_rvt_entry() != HAB_SUCCESS) { puts("hab entry function fail\n"); - goto hab_caam_clock_disable; + goto hab_exit_failure_print_status; } status = hab_rvt_check_target(HAB_TGT_MEMORY, (void *)ddr_start, bytes); if (status != HAB_SUCCESS) { printf("HAB check target 0x%08x-0x%08x fail\n", ddr_start, ddr_start + bytes); - goto hab_caam_clock_disable; + goto hab_exit_failure_print_status; } #ifdef DEBUG printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", ivt_offset, ivt_addr); @@ -558,12 +558,14 @@ int authenticate_image(uint32_t ddr_start, uint32_t image_size, load_addr = 0; } -hab_caam_clock_disable: - hab_caam_clock_enable(0); - +hab_exit_failure_print_status: #if !defined(CONFIG_SPL_BUILD) get_hab_status(); #endif + +hab_caam_clock_disable: + hab_caam_clock_enable(0); + if (load_addr != 0) result = 0; -- 2.7.4 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
