On 02.01.2018 20:01, Álvaro Fernández Rojas wrote:
> Add 8/16/32 bits and BE/LE versions of wait_for_bit.
> This is needed for reading registers that are not aligned to 32 bits.
> 
> Signed-off-by: Álvaro Fernández Rojas <nolt...@gmail.com>
> ---
>  v6: Introduce changes suggested by Jagan Teki:
>  - Switch to wait_for_bit instead of infinite loop.
> 
>  include/wait_bit.h | 44 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/include/wait_bit.h b/include/wait_bit.h
> index 06ad43a122..47891fa75c 100644
> --- a/include/wait_bit.h
> +++ b/include/wait_bit.h
> @@ -69,5 +69,49 @@ static inline int wait_for_bit(const char *prefix, const 
> u32 *reg,
>       return -ETIMEDOUT;
>  }
>  
> +#define BUILD_WAIT_FOR_BIT(sfx, type, read)                          \
> +                                                                     \
> +static inline int wait_for_bit_##sfx(const char *prefix,             \
> +                                  const u32 *reg,                    \

I suggest to use 'const void *reg' for compatibility with 64 bit systems
and to be consistant with the most readl() implementations

> +                                  const type mask,                   \
> +                                  const bool set,                    \
> +                                  const unsigned int timeout_ms,     \
> +                                  const bool breakable)              \
> +{                                                                    \
> +     type val;                                                       \
> +     unsigned long start = get_timer(0);                             \
> +                                                                     \
> +     while (1) {                                                     \
> +             val = read(reg);                                        \
> +                                                                     \
> +             if (!set)                                               \
> +                     val = ~val;                                     \
> +                                                                     \
> +             if ((val & mask) == mask)                               \
> +                     return 0;                                       \
> +                                                                     \
> +             if (get_timer(start) > timeout_ms)                      \
> +                     break;                                          \
> +                                                                     \
> +             if (breakable && ctrlc()) {                             \
> +                     puts("Abort\n");                                \
> +                     return -EINTR;                                  \
> +             }                                                       \
> +                                                                     \
> +             udelay(1);                                              \
> +             WATCHDOG_RESET();                                       \
> +     }                                                               \
> +                                                                     \
> +     debug("%s: Timeout (reg=%p mask=%x wait_set=%i)\n", prefix,     \
> +           reg, mask, set);                                          \

almost all users pass __func__ as value for the prefix argument. Since
this is a macro now, we could directly use __func__ in the debug() call
and omit the prefix argument

> +                                                                     \
> +     return -ETIMEDOUT;                                              \
> +}
> +
> +BUILD_WAIT_FOR_BIT(8, u8, readb)
> +BUILD_WAIT_FOR_BIT(le16, u16, readw)
> +BUILD_WAIT_FOR_BIT(be16, u16, readw_be)
> +BUILD_WAIT_FOR_BIT(le32, u32, readl)
> +BUILD_WAIT_FOR_BIT(be32, u32, readl_be)
>  
>  #endif
> 

-- 
- Daniel

Attachment: signature.asc
Description: OpenPGP digital signature

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to