Fabio Estevam wrote:
> Hi Stefano,
>
Hi Fabio,
> Yes, it is still the same binary, but just needs a different offset.
>
This is not what I have understood from the manual. In the chapter
regarding the flash header ("Flash header structure", figure 2.9), there
is the field "app_dest_ptr". This pointer must be set to the start
address of the flash/storage media. This means we have different
binaries due only to the value of this field. To set this field we need
to know the media where the system boots.
> BTW, I don't see the following offset defines used anywhere in the code:
>
> +#define FLASH_OFFSET_STANDARD 0x400
> +#define FLASH_OFFSET_NAND FLASH_OFFSET_STANDARD
> +#define FLASH_OFFSET_SD FLASH_OFFSET_STANDARD
> +#define FLASH_OFFSET_SPI FLASH_OFFSET_STANDARD
> +#define FLASH_OFFSET_ONENAND 0x100
They are used in the imximage_bootops structure in imximage.c. This
field is later used to set the app_dest_ptr field:
239 fhdr->app_dest_ptr = params->ep - hdr->flash_offset -
240 sizeof(struct imx_header);
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
