i checked, and if you mean these patches: https://patchwork.ozlabs.org/patch/765992/ https://patchwork.ozlabs.org/patch/765996/ https://patchwork.ozlabs.org/patch/765997/ https://patchwork.ozlabs.org/patch/765998/
i already applied them, and they didn't work as well. i also found these patches which i didn't try yet: https://lists.denx.de/pipermail/u-boot/2017-May/292230.html should i try those instead? 2018-01-17 15:09 GMT+02:00 Marek Vasut <ma...@denx.de>: > On 01/17/2018 02:06 PM, Simon Goldschmidt wrote: > > On 17.01.2018 14:01, RB23 wrote: > >> hey, i downloaded the september and november versions and i applied > >> the patches on both of them, re-compiled the u boot, > >> and still, it gives me the same error when trying the command "sf probe" > >> i'm not sure what to do, is it possible that i missed something? like > >> a define or something in the make menuconfig? > >> i did some debugging and it seems that the crash happens on this line: > >> div = DIV_ROUND_UP(ref_clk_hz, sclk-hz * 2) -1; > >> thanks. > >> > > > > I don't know exactly which patches you are talking about, but the > > divide-by-zero problem is still present with all patches I applied. To > > fix it, you need to set up your device tree correctly so that the speed > > is initialized. > > > > If I remember correctly, you need need to have a flash chip below the > > qspi in the device tree. Check Jason's changes to the various socfpga > > dts files. > > > > Er, maybe a patch which checks this condition wouldn't hurt ? > > -- > Best regards, > Marek Vasut > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot