On 01/17/2018 02:52 AM, Chris Brandt wrote:
> Add support for RZ/A1 series SoCs.
>
> Signed-off-by: Chris Brandt <[email protected]>
Applied, thanks !
btw. are you planning to do DT/DM conversion of the RZ/A1 ?
>
> ---
> v2:
> * Rebased against current tree
> ---
> drivers/serial/serial_sh.h | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
> index 1b8d742f1c..1ea95509d7 100644
> --- a/drivers/serial/serial_sh.h
> +++ b/drivers/serial/serial_sh.h
> @@ -226,7 +226,8 @@ struct uart_port {
> # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
> #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \
> defined(CONFIG_R8A7792) || defined(CONFIG_R8A7793) || \
> - defined(CONFIG_R8A7794) || defined(CONFIG_RCAR_GEN3)
> + defined(CONFIG_R8A7794) || defined(CONFIG_RCAR_GEN3) || \
> + defined(CONFIG_R7S72100)
> # if defined(CONFIG_SCIF_A)
> # define SCIF_ORER 0x0200
> # else
>
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
