On 20.01.2018 13:18, Andreas Färber wrote:
Fix a typo in help output (awailable -> available).
Tidy the grammar - not the board connects to a port, we do.
While at it, be consistent in upper-casing the comments.
Fixes: eee4835d22 ("tools: Add Marvell recovery image download script")
Cc: Konstantin Porotchkin <[email protected]>
Cc: Stefan Roese <[email protected]>
Cc: Igal Liberman <[email protected]>
Signed-off-by: Andreas Färber <[email protected]>
---
tools/mrvl_uart.sh | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/mrvl_uart.sh b/tools/mrvl_uart.sh
index 500fa117eb..6824208902 100755
--- a/tools/mrvl_uart.sh
+++ b/tools/mrvl_uart.sh
@@ -46,13 +46,13 @@ then
echo -e "\nMarvell recovery image downloader for Armada SoC family."
echo -e "Command syntax:"
echo -e "\t$(basename $0) <port> <file> [2|4|8]"
- echo -e "\tport - serial port the target board connected to"
+ echo -e "\tport - serial port the target board is connected to"
echo -e "\tfile - recovery boot image for target download"
echo -e "\t2|4|8 - times to increase the default serial port speed by"
echo -e "For example - load the image over ttyUSB0 @ 460800 baud:"
echo -e "$(basename $0) /dev/ttyUSB0 /tmp/flash-image.bin 4\n"
echo -e "=====WARNING====="
- echo -e "- The speed-up option is not awailable in SoC families prior to
A8K+"
+ echo -e "- The speed-up option is not available in SoC families prior to
A8K+"
echo -e "- This utility is not compatible with Armada 37xx SoC family\n"
fi
@@ -111,7 +111,7 @@ stty -F $port raw ignbrk time 5 $fast_baudrate
sx -vv $file > $port < $port
#sx-at91 $port $file
-# return the port to the default speed
+# Return the port to the default speed
stty -F $port raw ignbrk time 5 $default_baudrate
# Optional - fire up Minicom
Reviewed-by: Stefan Roese <[email protected]>
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
