On Mon, Jan 22, 2018 at 3:30 PM, Tom Rini <tr...@konsulko.com> wrote: > On Fri, Jan 12, 2018 at 07:26:06AM -0600, Adam Ford wrote: > >> This converts the following to Kconfig: >> CONFIG_SYS_DV_CLKMODE >> CONFIG_SYS_DA850_PLL0_POSTDIV >> CONFIG_SYS_DA850_PLL0_PLLDIV1 >> CONFIG_SYS_DA850_PLL0_PLLDIV2 >> CONFIG_SYS_DA850_PLL0_PLLDIV3 >> CONFIG_SYS_DA850_PLL0_PLLDIV4 >> CONFIG_SYS_DA850_PLL0_PLLDIV5 >> CONFIG_SYS_DA850_PLL0_PLLDIV7 >> CONFIG_SYS_DA850_PLL1_POSTDIV >> CONFIG_SYS_DA850_PLL1_PLLDIV1 >> CONFIG_SYS_DA850_PLL1_PLLDIV2 >> CONFIG_SYS_DA850_PLL1_PLLDIV3 >> >> Signed-off-by: Adam Ford <aford...@gmail.com> >> Reviewed-by: David Lechner <da...@lechnology.com> >> --- >> Changes in V3: >> Using the L138 Technical Reference manual, I changed the names to match >> the descriptions of the registers as listed in Table 8-2 and 8-3 of >> the >> PLL Control 0 and PLL Control 1 Registers. >> V2: >> Expand Kconfig help definitions to give a small explanation of >> options >> V1: >> This patch is a continuation of Convert CONFIG_SOC_DA8XX et al >> This also showed warnings when used with the legoev3_defconfig, however >> it seems like the ev3 board was defining things in the header it didn't need >> since it doesn't seem to be building da850_lowlevel.c. I don't have the >> hardware to test that board. >> >> arch/arm/mach-davinci/Kconfig | 85 >> ++++++++++++++++++++++++++++++++++++++++- >> configs/omapl138_lcdk_defconfig | 1 + >> include/configs/calimain.h | 13 ------- >> include/configs/da850evm.h | 13 ------- >> include/configs/ipam390.h | 13 ------- >> include/configs/legoev3.h | 13 ------- >> include/configs/omapl138_lcdk.h | 13 ------- >> scripts/config_whitelist.txt | 12 ------ >> 8 files changed, 85 insertions(+), 78 deletions(-) > > [patchwork link is https://patchwork.ozlabs.org/patch/859919/] > > First, this should also cover CONFIG_SYS_DA850_PLL0_PLLM which shouldn't > be too bad. > > Second, this needs to deal with calimain, which has both > CONFIG_SYS_DA850_PLL1_PLLM and CONFIG_SYS_DA850_PLL0_PLLM as dynamic. > Ideas? Thanks! > Can we push the low-hanging fruit and come back and revisit the rest at a later date? My goal was just try and clean up a bunch of config files.
adam > -- > Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot