Dear "Matthias Weisser", In message <[email protected]> you wrote: > > >> > --- a/Makefile > >> > +++ b/Makefile > >> > @@ -2874,6 +2874,13 @@ TNY_A9260_config : unconfig > >> > @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h > >> > @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91 > >> > > >> > +######################################################################### > >> > +## ARM926EJ-S Systems > >> > +######################################################################### ... > > Also note that lists are sorted, so please move this entry to where it > > belongs. > > Can you tell me where it belongs to then?
In the "ARM926EJ-S Systems" group? > In the ARM section of the makefile we have > * StrongARM > * ARM92xT > * two Atmel related sections > * ARM integrator boards > * ARM supplied versatile development boards > * S3C44B0 (Samsung) > * ARM720T > * ARM Cortex > * XScale > * ARM1136 > * ARM1176 I also see an entry "Atmel ARM926EJ-S Systems" here, which already lists a numnber of arm926ejs boards. > My board doesn't match any of the above categories so I thought > introducing a new category for generic ARM926EJS devices would be > a good idea. Why do you think your board does not fit into the "Atmel ARM926EJ-S Systems" group? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] It is dangerous to be right on a subject on which the established authorities are wrong. -- Voltaire _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
