> On 25 Jan 2018, at 18:37, Lukasz Majewski <lu...@denx.de> wrote: > > From: Anatolij Gustschin <ag...@denx.de> > > Selecting this option will reduce SPL boot time by approx. 6 ms > (e. g. with 70 bytes long banner string at 115200 baud). > > Signed-off-by: Anatolij Gustschin <ag...@denx.de> > Tested-by: Lukasz Majewski <lu...@denx.de>
Reviewed-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> See below for a nitpick. > --- > > common/spl/Kconfig | 7 +++++++ > common/spl/spl.c | 2 ++ > 2 files changed, 9 insertions(+) > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > index d686b1ecbd..d1f9cae6b7 100644 > --- a/common/spl/Kconfig > +++ b/common/spl/Kconfig > @@ -118,6 +118,13 @@ config SPL_SEPARATE_BSS > location is used. Normally we put the device tree at the end of BSS > but with this option enabled, it goes at _image_binary_end. > > +config SPL_DISABLE_BANNER_PRINT > + bool "Disable output of the SPL banner 'U-Boot SPL ...'" > + help > + If this option is enabled, SPL will not print the banner with version > + info. Selecting this option could be useful to reduce SPL boot time > + (e.g. approx. 6 ms slower, when output on i.MX6 with 1152000 baud). You seem to be off by “times 10” for the baud-rate. > + > config SPL_DISPLAY_PRINT > bool "Display a board-specific message in SPL" > help > diff --git a/common/spl/spl.c b/common/spl/spl.c > index 76c1963611..898c416a66 100644 > --- a/common/spl/spl.c > +++ b/common/spl/spl.c > @@ -477,8 +477,10 @@ void preloader_console_init(void) > > gd->have_console = 1; > > +#ifndef CONFIG_SPL_DISABLE_BANNER_PRINT > puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \ > U_BOOT_TIME ")\n"); > +#endif > #ifdef CONFIG_SPL_DISPLAY_PRINT > spl_display_print(); > #endif > -- > 2.11.0 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot