CONFIG_PHY_ADDR is used for old-style configuration. This makes
impossible changing the PHY address, if multiple boards share a same
config header file (for example include/configs/sunxi-common.h).

Moving this to Kconfig helps overcoming this issue. It's defined
as entry inside PHYLIB section.

After the implemention, moveconfig was run. The issues are:
        - edb9315a      - CONFIG_PHYLIB is not enabled. Entry is
                          deleted.

        - ds414         - CONFIG_PHYLIB is in incompatible format:
                          { 0x1, 0x0 }. This entry is also deleted.

        - devkit3250    - The PHY_ADDR is in hex format (0x1F).
                          Manually CONFIG_PHY_ADDR=31 is added in
                          the defconfig.

After the changes the suspicious defconfigs passes building.

Signed-off-by: Stefan Mavrodiev <ste...@olimex.com>
---
 README                         | 4 ----
 configs/devkit3250_defconfig   | 1 +
 configs/khadas-vim_defconfig   | 1 +
 configs/libretech-cc_defconfig | 1 +
 configs/p212_defconfig         | 1 +
 drivers/net/phy/Kconfig        | 7 +++++++
 include/configs/am335x_shc.h   | 1 -
 include/configs/baltos.h       | 1 -
 include/configs/devkit3250.h   | 1 -
 include/configs/ds414.h        | 1 -
 include/configs/edb93xx.h      | 1 -
 include/configs/khadas-vim.h   | 2 --
 include/configs/libretech-cc.h | 2 --
 include/configs/p212.h         | 2 --
 include/configs/pepper.h       | 1 -
 include/configs/sunxi-common.h | 2 --
 include/configs/work_92105.h   | 1 -
 include/configs/x600.h         | 1 -
 scripts/config_whitelist.txt   | 1 -
 19 files changed, 11 insertions(+), 21 deletions(-)

diff --git a/README b/README
index b53ea7d..499184d 100644
--- a/README
+++ b/README
@@ -1436,10 +1436,6 @@ The following options need to be configured:
                be at least 4MB.
 
 - MII/PHY support:
-               CONFIG_PHY_ADDR
-
-               The address of PHY on MII bus.
-
                CONFIG_PHY_CLOCK_FREQ (ppc4xx)
 
                The clock frequency of the MII bus
diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index 2ad08ae..930b631 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -36,6 +36,7 @@ CONFIG_MTD_NOR_FLASH=y
 CONFIG_NAND=y
 CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_PHYLIB=y
+CONFIG_PHY_ADDR=31
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
diff --git a/configs/khadas-vim_defconfig b/configs/khadas-vim_defconfig
index 4ceab90..e9a96d3 100644
--- a/configs/khadas-vim_defconfig
+++ b/configs/khadas-vim_defconfig
@@ -20,6 +20,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
+CONFIG_PHY_ADDR=8
 CONFIG_PHY_MESON_GXL=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
diff --git a/configs/libretech-cc_defconfig b/configs/libretech-cc_defconfig
index 3bccff1..86852b1 100644
--- a/configs/libretech-cc_defconfig
+++ b/configs/libretech-cc_defconfig
@@ -20,6 +20,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
+CONFIG_PHY_ADDR=8
 CONFIG_PHY_MESON_GXL=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
diff --git a/configs/p212_defconfig b/configs/p212_defconfig
index cb9be4a..9466238 100644
--- a/configs/p212_defconfig
+++ b/configs/p212_defconfig
@@ -20,6 +20,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
+CONFIG_PHY_ADDR=8
 CONFIG_PHY_MESON_GXL=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 95b7534..c934aed 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -12,6 +12,13 @@ menuconfig PHYLIB
 
 if PHYLIB
 
+config PHY_ADDR
+       int "PHY address"
+       default 1 if ARCH_SUNXI
+       default 0
+       help
+         The address of PHY on MII bus. Usually in range of 0 to 31.
+
 config B53_SWITCH
        bool "Broadcom BCM53xx (RoboSwitch) Ethernet switch PHY support."
        help
diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h
index e2d329a..2b705fc 100644
--- a/include/configs/am335x_shc.h
+++ b/include/configs/am335x_shc.h
@@ -264,7 +264,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
-#define CONFIG_PHY_ADDR                        0
 #define CONFIG_PHY_SMSC
 
 /* I2C configuration */
diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 75dd0c5..31ae20c 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -285,7 +285,6 @@
 #endif
 
 /* Network. */
-#define CONFIG_PHY_ADDR                        0
 #define CONFIG_PHY_SMSC
 #define CONFIG_MII
 #define CONFIG_PHY_ATHEROS
diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index 526a81a..b66b90e 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -73,7 +73,6 @@
 #define CONFIG_RMII
 #define CONFIG_PHY_SMSC
 #define CONFIG_LPC32XX_ETH
-#define CONFIG_PHY_ADDR                        0x1F
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
 /*
diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index c840c93..03e96df 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -41,7 +41,6 @@
 #define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64KiB sectors */
 
 #define CONFIG_PHY_MARVELL             /* there is a marvell phy */
-#define CONFIG_PHY_ADDR                        { 0x1, 0x0 }
 #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII
 
 #define CONFIG_SYS_ALT_MEMTEST
diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
index fcad7c4..03a1eff 100644
--- a/include/configs/edb93xx.h
+++ b/include/configs/edb93xx.h
@@ -97,7 +97,6 @@
 #define CONFIG_DRIVER_EP93XX_MAC
 #define CONFIG_MII_SUPPRESS_PREAMBLE
 #define CONFIG_MII
-#define CONFIG_PHY_ADDR                1
 #undef CONFIG_NETCONSOLE
 
 /* SDRAM configuration */
diff --git a/include/configs/khadas-vim.h b/include/configs/khadas-vim.h
index 9d99bc5..f44b388 100644
--- a/include/configs/khadas-vim.h
+++ b/include/configs/khadas-vim.h
@@ -12,8 +12,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_PHY_ADDR                8
-
 #define MESON_FDTFILE_SETTING 
"fdtfile=amlogic/meson-gxl-s905x-khadas-vim.dtb\0"
 
 #include <configs/meson-gxbb-common.h>
diff --git a/include/configs/libretech-cc.h b/include/configs/libretech-cc.h
index ffaca26..08dfb30 100644
--- a/include/configs/libretech-cc.h
+++ b/include/configs/libretech-cc.h
@@ -12,8 +12,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_PHY_ADDR                8
-
 #define MESON_FDTFILE_SETTING 
"fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb\0"
 
 #include <configs/meson-gxbb-common.h>
diff --git a/include/configs/p212.h b/include/configs/p212.h
index 793b556..0477384 100644
--- a/include/configs/p212.h
+++ b/include/configs/p212.h
@@ -12,8 +12,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_PHY_ADDR                8
-
 /* Serial setup */
 #define CONFIG_CONS_INDEX              0
 
diff --git a/include/configs/pepper.h b/include/configs/pepper.h
index 7ef2529..960afa0 100644
--- a/include/configs/pepper.h
+++ b/include/configs/pepper.h
@@ -77,7 +77,6 @@
 #define CONFIG_SYS_NS16550_COM1                0x44e09000
 
 /* Ethernet support */
-#define CONFIG_PHY_ADDR                        0
 #define CONFIG_PHY_RESET_DELAY 1000
 
 /* SPL */
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 9b3944a..e252e7fb 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -296,12 +296,10 @@ extern int soft_i2c_gpio_scl;
 
 /* Ethernet support */
 #ifdef CONFIG_SUN4I_EMAC
-#define CONFIG_PHY_ADDR                1
 #define CONFIG_MII                     /* MII PHY management           */
 #endif
 
 #ifdef CONFIG_SUN7I_GMAC
-#define CONFIG_PHY_ADDR                1
 #define CONFIG_MII                     /* MII PHY management           */
 #define CONFIG_PHY_REALTEK
 #endif
diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index 7faab4e..c0a9833 100644
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -57,7 +57,6 @@
 
 #define CONFIG_PHY_SMSC
 #define CONFIG_LPC32XX_ETH
-#define CONFIG_PHY_ADDR 0
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 /* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */
 
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 66a8e88..ea9500a 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -71,7 +71,6 @@
 /* Ethernet config options */
 #define CONFIG_MII
 #define CONFIG_PHY_RESET_DELAY                 10000           /* in usec */
-#define CONFIG_PHY_ADDR                0       /* PHY address */
 
 #define CONFIG_SPEAR_GPIO
 
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index ef83c00..c94e6ce 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1593,7 +1593,6 @@ CONFIG_PERIF2_FREQ
 CONFIG_PERIF3_FREQ
 CONFIG_PERIF4_FREQ
 CONFIG_PHYSMEM
-CONFIG_PHY_ADDR
 CONFIG_PHY_BASE_ADR
 CONFIG_PHY_BCM5421S
 CONFIG_PHY_ET1011C_TX_CLK_FIX
-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to