On 03.02.18 02:47, Jonathan Gray wrote: > On Sun, Jan 28, 2018 at 01:54:25PM -0500, Tom Rini wrote: >> On Tue, Jan 23, 2018 at 06:05:21PM +0100, Alexander Graf wrote: >> >>> The bcm283x family of SoCs have a GPIO controller that also acts as >>> pinctrl controller. >>> >>> This patch introduces a new pinctrl driver that can actually properly mux >>> devices into their device tree defined pin states and is now the primary >>> owner of the gpio device. The previous GPIO driver gets moved into a >>> subdevice of the pinctrl driver, bound to the same OF node. >>> >>> That way whenever a device asks for pinctrl support, it gets it >>> automatically from the pinctrl driver and GPIO support is still available >>> in the normal command line phase. >>> >>> Signed-off-by: Alexander Graf <ag...@suse.de> >> >> Applied to u-boot/master, thanks! > > It seems one of the recent commits here has broken booting on rpi_3 with > the vendor supplied device tree via efi_loader.
Do you have a pointer to the dtb? I'm actually using the vendor supplied device tree to boot, but I don't specify it, I just leave it to the RPi fw to pass it in. Can you please go into detail on your setup? Alex _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot