Hi Sebastian. On 10/01/2018 20:31, Sebastian Reichel wrote: > This series improves the support on the bx50v3 devices (b540v3, b650v3 > and b850v3). Changes outside of the bx50v3 specific areas: > > - Added driver for RX8010SJ RTC. > - Added functionality to e1000 driver to enable wrting of EEPROM/MAC > address. > > Changes since PATCHv1: > * Rebased to v2018.01 > * Fixed compiler warning for qemu amd64 target > > -- Sebastian > > Hannu Lounento (5): > net: e1000: add support for writing to EEPROM > net: e1000: split e1000_read_mac_addr > net: e1000: implement eth_write_hwaddr > board: ge: bx50v3: program MAC address to I210 > board: ge: bx50v3: mount rootfs read-only > > Ian Ray (5): > configs: Add network device support for bx50v3 products > board: ge: bx50v3: Support FIT and select configuration based on VPD > config: ge_bx50v3: read boot script > configs: ge_bx50v3: enable bootcount > configs: ge_bx50v3: automatic partition selection and video output > failure message > > Martyn Welch (3): > board: ge: Enable access to i2c bus 1 and 2 > board: ge: bx50v3: move FEC MAC address programming to driver > board: ge: bx50v3: Enable hardware watchdog > > Nandor Han (2): > rtc: adding RX8010SJ rtc driver > board,ge,bx50v3 - rtc time validation > > board/ge/bx50v3/bx50v3.c | 130 ++++++++++----- > configs/ge_b450v3_defconfig | 7 +- > configs/ge_b650v3_defconfig | 7 +- > configs/ge_b850v3_defconfig | 8 +- > drivers/net/e1000.c | 294 +++++++++++++++++++++++++++++++--- > drivers/net/e1000.h | 3 + > drivers/rtc/Kconfig | 6 + > drivers/rtc/Makefile | 1 + > drivers/rtc/rx8010sj.c | 378 > ++++++++++++++++++++++++++++++++++++++++++++ > include/configs/ge_bx50v3.h | 190 +++++++++------------- > 10 files changed, 849 insertions(+), 175 deletions(-) > create mode 100644 drivers/rtc/rx8010sj.c >
Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot