After settings the speed of the sd with the switch command, a check is done to make sure that the new speed has been set. The current check has a masking error: speed are encoded on 4 bits only. Fix it by masking the upper bits.
This fixes a problem seen with QEmu emulating a vexpress-a15. Reported-by: Jonathan Gray <j...@jsg.id.au> Signed-off-by: Jean-Jacques Hiblot <jjhib...@ti.com> --- drivers/mmc/mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 255310a..31614dd 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1333,7 +1333,7 @@ static int sd_set_card_speed(struct mmc *mmc, enum bus_mode mode) if (err) return err; - if ((__be32_to_cpu(switch_status[4]) >> 24) != speed) + if (((__be32_to_cpu(switch_status[4]) >> 24) & 0xF) != speed) return -ENOTSUPP; return 0; -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot