On Fri, Feb 9, 2018 at 10:53 PM, Lukasz Majewski <lu...@denx.de> wrote: > This converts the following to Kconfig: > CONFIG_SYS_BOOTCOUNT_SINGLEWORD > > Signed-off-by: Lukasz Majewski <lu...@denx.de> > --- > > configs/highbank_defconfig | 1 + > drivers/bootcount/Kconfig | 6 ++++++ > include/configs/highbank.h | 1 - > 3 files changed, 7 insertions(+), 1 deletion(-) > > diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig > index 41f4ef5f78..60a43db197 100644 > --- a/configs/highbank_defconfig > +++ b/configs/highbank_defconfig > @@ -25,6 +25,7 @@ CONFIG_EFI_PARTITION=y > CONFIG_ENV_IS_IN_NVRAM=y > CONFIG_SCSI_AHCI=y > CONFIG_BOOTCOUNT_LIMIT=y > +CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y > # CONFIG_MMC is not set > CONFIG_SCSI=y > CONFIG_OF_LIBFDT=y > diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig > index cb6be73d52..d82289f57b 100644 > --- a/drivers/bootcount/Kconfig > +++ b/drivers/bootcount/Kconfig > @@ -17,6 +17,12 @@ config BOOTCOUNT_LIMIT > Enable checking for exceeding the boot count limit. > More information: http://www.denx.de/wiki/DULG/UBootBootCountLimit > > +config SYS_BOOTCOUNT_SINGLEWORD > + bool "Use single word to pack boot count and magic value" > + help > + This option enables packing boot count magic value and boot count > + into single word (32 bits). > + > if BOOTCOUNT > > config BOOTCOUNT_EXT > diff --git a/include/configs/highbank.h b/include/configs/highbank.h > index 2831aa3875..6c5d3ae3ac 100644 > --- a/include/configs/highbank.h > +++ b/include/configs/highbank.h > @@ -26,7 +26,6 @@ > #define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) } > #define CONFIG_CONS_INDEX 0 > > -#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD > #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian > accessors */ > #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c >
Tested-by: Alex Kiernan <alex.kier...@gmail.com> -- Alex Kiernan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot