On Mon, Feb 12, 2018 at 01:25:21AM +0000, Andre Przywara wrote: > The current master fails to build some Allwinner H5 boards, due to > exceeding the U-Boot proper size limit we currently have still in place. > This affects: > - nanopi_neo2_defconfig > - nanopi_neo_plus2_defconfig > - orangepi_pc2_defconfig > - orangepi_prime_defconfig > - orangepi_zero_plus2_defconfig > To workaround this issue, a left-over low hanging fruit is to disable > the MII *command*, which is probably only useful for debugging and not > needed for a normal boot flow, even when booting via network (PXE/TFTP). > > Allow to de-select CMD_MII, even when the distro default enables it. > Then disable it explicitly in the affected board's defconfigs. > This makes all Allwinner ARMv8 boards build again. > > Signed-off-by: Andre Przywara <andre.przyw...@arm.com> > --- > Hi, > > my sincere apologies for this ugly hack (and I welcome any nicer solution!), > but we are running out of silver bullets for this particular problem and this > command seems both easy to give up and worthwhile in terms of code size > savings (~11KB). > The "default n if ..." doesn't seem to work with "imply", so I needed to > disable it in each of the affected defconfigs. Please let me know if there > is a better solution.
Can we not move the env location now? Thanks! -- Tom
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot