Hi Alex,

>  - Bootcount:
> -             CONFIG_BOOTCOUNT_ENV
> -             If no softreset save registers are found on the
> hardware
> -             "bootcount" is stored in the environment. To prevent
> a
> -             saveenv on all reboots, the environment variable
> -             "upgrade_available" is used. If "upgrade_available"
> is
> -             0, "bootcount" is always 0, if "upgrade_available" is
> -             1 "bootcount" is incremented in the environment.
> -             So the Userspace Applikation must set the
> "upgrade_available"
> -             and "bootcount" variable to 0, if a boot was
> successfully. -
> -- Pre-Boot Commands:
        ^^^^^^^^^^^ - This line shall be keep. The "- Bootcount:" Above
        shall be deleted instead. 

>               CONFIG_PREBOOT



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de

Attachment: pgppKJoJayxkK.pgp
Description: OpenPGP digital signature

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to