Nimbus Cloud is an AVR32 based single board computer with 256MiB NAND, 64MiB SDRAM, battery backed RTC, LCD/touch screen support, VGA Output, Ethernet and offers seamless integration with Indefia's Zigbee transceivers.
--- CREDITS | 4 + MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/indefia/nimbuscloud/Makefile | 40 ++++++ board/indefia/nimbuscloud/config.mk | 3 + board/indefia/nimbuscloud/flash.c | 226 +++++++++++++++++++++++++++++++ board/indefia/nimbuscloud/nimbuscloud.c | 166 +++++++++++++++++++++++ board/indefia/nimbuscloud/u-boot.lds | 72 ++++++++++ include/configs/nimbuscloud.h | 182 +++++++++++++++++++++++++ 10 files changed, 701 insertions(+), 0 deletions(-) diff --git a/CREDITS b/CREDITS index 2471029..69a9dde 100644 --- a/CREDITS +++ b/CREDITS @@ -196,6 +196,10 @@ N: Anne-Sophie Harnois E: [email protected] D: Port to Walnut405 board +N: Semih Hazar +E: [email protected] +D: Nimbus Cloud board support + N: Andreas Heppel E: [email protected] D: CPU Support for MPC 75x; board support for Eltec BAB750 [obsolete!] diff --git a/MAINTAINERS b/MAINTAINERS index 9734b1d..0764ee9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -880,6 +880,10 @@ Hans-Christian Egtvedt <[email protected]> FAVR-32-EZKIT AT32AP7000 +Semih Hazar <[email protected]> + + NIMBUSCLOUD AT32AP7000 + Mark Jackson <[email protected]> MIMC200 AT32AP7000 diff --git a/MAKEALL b/MAKEALL index ab1bb6f..fde90ee 100755 --- a/MAKEALL +++ b/MAKEALL @@ -859,6 +859,7 @@ LIST_avr32=" \ favr-32-ezkit \ hammerhead \ mimc200 \ + nimbuscloud \ " ######################################################################### diff --git a/Makefile b/Makefile index 536ccb3..ea16786 100644 --- a/Makefile +++ b/Makefile @@ -3595,6 +3595,9 @@ hammerhead_config : unconfig mimc200_config : unconfig @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x +nimbuscloud_config : unconfig + @$(MKCONFIG) $(@:_config=) avr32 at32ap nimbuscloud indefia at32ap700x + #======================================================================== # SH3 (SuperH) #======================================================================== diff --git a/board/indefia/nimbuscloud/Makefile b/board/indefia/nimbuscloud/Makefile new file mode 100644 index 0000000..5ddc351 --- /dev/null +++ b/board/indefia/nimbuscloud/Makefile @@ -0,0 +1,40 @@ +# +# Copyright (C) 2008-2009 Indefia +# +# See file CREDITS for list of people who contributed to this project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB := $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o flash.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/indefia/nimbuscloud/config.mk b/board/indefia/nimbuscloud/config.mk new file mode 100644 index 0000000..9a794e5 --- /dev/null +++ b/board/indefia/nimbuscloud/config.mk @@ -0,0 +1,3 @@ +TEXT_BASE = 0x00000000 +PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections +PLATFORM_LDFLAGS += --gc-sections diff --git a/board/indefia/nimbuscloud/flash.c b/board/indefia/nimbuscloud/flash.c new file mode 100644 index 0000000..70f51b0 --- /dev/null +++ b/board/indefia/nimbuscloud/flash.c @@ -0,0 +1,226 @@ +/* + * Copyright (C) 2009 Indefia + * + * Based on work (c) Atmel Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <asm/arch/cacheflush.h> +#include <asm/io.h> +#include <asm/sections.h> + +DECLARE_GLOBAL_DATA_PTR; + +flash_info_t flash_info[1]; + +static void flash_identify(uint16_t *flash, flash_info_t *info) +{ + unsigned long flags; + + flags = disable_interrupts(); + + dcache_flush_unlocked(); + + writew(0x90, flash); + info->flash_id = readl(flash); + writew(0xff, flash); + + readw(flash); + + if (flags) + enable_interrupts(); +} + +unsigned long flash_init(void) +{ + unsigned long addr; + unsigned int i; + + gd->bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; + gd->bd->bi_flashsize = CONFIG_SYS_FLASH_SIZE; + gd->bd->bi_flashoffset = _edata - _text; + + flash_info[0].size = CONFIG_SYS_FLASH_SIZE; + flash_info[0].sector_count = CONFIG_SYS_MAX_FLASH_SECT; + + flash_identify(uncached((void *)CONFIG_SYS_FLASH_BASE), &flash_info[0]); + + /* First 8 sectors are 8k */ + for (i = 0, addr = 0; i < 8; i++, addr += 0x2000) + flash_info[0].start[i] = addr; + + /* Remaing are 64k */ + for (; i < flash_info[0].sector_count; i++, addr += 0x10000) + flash_info[0].start[i] = addr; + + return CONFIG_SYS_FLASH_SIZE; +} + +void flash_print_info(flash_info_t *info) +{ + if ( info->flash_id == 0x1f88c5 ) { + printf("Atmel AT49BV320C"); + } else if ( info->flash_id == 0x1f90c5 ) { + printf("Atmel AT49BV320D"); + } else if ( info->flash_id == 0x1f90c3 ) { + printf("Atmel AT49BV160D"); + } else { + printf("Manufacturer/Device ID: 0x%02x/0x%04x", + (int) (info->flash_id >> 16), + (int) (info->flash_id & FLASH_TYPEMASK)); + } + + printf(", Size: %ld KB in %d sectors\n", + info->size >> 10, info->sector_count); +} + +int flash_erase(flash_info_t *info, int s_first, int s_last) +{ + unsigned long flags; + uint16_t *fb, *sb; + unsigned int i; + uint16_t status; + + if ((s_first < 0) || (s_first > s_last) + || (s_last >= info->sector_count)) { + puts("Error: first and/or last sector out of range\n"); + return ERR_INVAL; + } + + for (i = s_first; i < s_last; i++) + if (info->protect[i]) { + printf("Error: sector %d is protected\n", i); + return ERR_PROTECTED; + } + + fb = (uint16_t *)uncached(info->start[0]); + + dcache_flush_unlocked(); + + for (i = s_first; (i <= s_last) && !ctrlc(); i++) { + sb = (uint16_t *)uncached(info->start[i]); + printf("Erasing sector %d %p\n", i, sb); + + flags = disable_interrupts(); + + /* Unlock sector */ + writew(0x50, fb); /* Clear status bit */ + writew(0x60, fb); /* Sector unlock */ + writew(0xd0, sb); /* confirm */ + + while ( ! (readw(fb) & 0x80) ); + + /* Erase sector */ + writew(0x50, fb); /* Clear status bit */ + writew(0x20, fb); /* Sector erase */ + writew(0xd0, sb); /* confirm */ + + /* Wait for completion */ + do { + status = readw(fb); + } while (!(status & 0x80)); + + writew(0xff, fb); + + /* + * Make sure the command actually makes it to the bus + * before we re-enable interrupts. + */ + readw(fb); + + if (flags) + enable_interrupts(); + + if (status != 0x80) { + printf("Flash erase error at address 0x%p: 0x%02x\n", + sb, status); + return ERR_PROG_ERROR; + } + } + + if (ctrlc()) + printf("User interrupt!\n"); + + return ERR_OK; +} + +int write_buff(flash_info_t *info, uchar *src, + ulong addr, ulong count) +{ + unsigned long flags; + uint16_t *base, *p, *s, *end; + uint16_t word, status; + int ret = ERR_OK; + + if (addr < info->start[0] + || (addr + count) > (info->start[0] + info->size) + || (addr + count) < addr) { + puts("Error: invalid address range\n"); + return ERR_INVAL; + } + + if (addr & 1 || count & 1 || (unsigned int)src & 1) { + puts("Error: misaligned source, destination or count\n"); + return ERR_ALIGN; + } + + base = (uint16_t *)uncached(info->start[0]); + end = (uint16_t *)uncached(addr + count); + + flags = disable_interrupts(); + + dcache_flush_unlocked(); + sync_write_buffer(); + + for (p = (uint16_t *)uncached(addr), s = (uint16_t *)src; + p < end && !ctrlc(); p++, s++) { + word = *s; + + writew(0x40, base); + writew(word, p); + + sync_write_buffer(); + + /* Wait for completion */ + do { + status = readw(p); + } while (!(status & 0x80)); + + writew(0xff, base); + readw(base); + + status= readw(p); + if (status != word) { + printf("Flash write error at address 0x%p: 0x%02x\n", + p, status); + printf("Wrote %04x Read %04x\n", word, status); + ret = ERR_PROG_ERROR; + break; + } + } + + if (flags) + enable_interrupts(); + + return ret; +} + diff --git a/board/indefia/nimbuscloud/nimbuscloud.c b/board/indefia/nimbuscloud/nimbuscloud.c new file mode 100644 index 0000000..03fc5c9 --- /dev/null +++ b/board/indefia/nimbuscloud/nimbuscloud.c @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2008-2009 Indefia + * + * Based on atngw100.c (c) Atmel Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> + +#include <asm/io.h> +#include <asm/sdram.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> +#include <asm/arch/hmatrix.h> +#include <asm/arch/portmux.h> +#include <netdev.h> +#include <net.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct sdram_config sdram_config = { + .data_bits = SDRAM_DATA_32BIT, + .row_bits = 13, + .col_bits = 9, + .bank_bits = 2, + .cas = 3, + .twr = 2, + .trc = 7, + .trp = 2, + .trcd = 2, + .tras = 5, + .txsr = 5, + /* 7.81 us */ + .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000, +}; + +static u8 read_configsw(void) { + u8 configsw = 0; + + if ( ! gpio_get_value(GPIO_PIN_PB(13)) ) + configsw |= 1; + if ( ! gpio_get_value(GPIO_PIN_PB(14)) ) + configsw |= 2; + if ( ! gpio_get_value(GPIO_PIN_PB(15)) ) + configsw |= 4; + if ( ! gpio_get_value(GPIO_PIN_PB(16)) ) + configsw |= 8; + + return configsw; +} + + +int board_early_init_f(void) +{ + /* Enable SDRAM in the EBI mux */ + hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE)); + + portmux_enable_ebi(32, 23, 0, PORTMUX_DRIVE_HIGH); + portmux_enable_usart1(PORTMUX_DRIVE_MIN); + + /* Enable GPIO on config swicthes */ + portmux_select_gpio( + PORTMUX_PORT_B, + (1 << 13) | (1 << 14) | (1 << 15) | (1 << 16), + PORTMUX_DIR_INPUT | PORTMUX_PULL_UP); + +#if defined(CONFIG_MACB) + portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH); +#endif +#if defined(CONFIG_MMC) + portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW); +#endif + + if ( (read_configsw() & 1) == 1 ) { + gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE; + } + + return 0; +} + +phys_size_t initdram(int board_type) +{ + unsigned long expected_size; + unsigned long actual_size; + void *sdram_base; + + sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE); + + expected_size = sdram_init(sdram_base, &sdram_config); + actual_size = get_ram_size(sdram_base, expected_size); + + unmap_physmem(sdram_base, EBI_SDRAM_SIZE); + + if (expected_size != actual_size) + printf("Warning: Only %lu of %lu MiB SDRAM is working\n", + actual_size >> 20, expected_size >> 20); + + return actual_size; +} + +int misc_init_r(void) +{ + char buf[3]; + u8 configsw; + + configsw = read_configsw(); + + if ( (configsw & 1) == 1 ) { + setenv("bootdelay", "0"); + } + + sprintf(buf, "%d", configsw); + setenv("configsw", buf); + + return 0; +} + +int board_early_init_r(void) +{ + gd->bd->bi_phy_id[0] = 0x01; + return 0; +} + +#ifdef CONFIG_CMD_NET + +extern int macb_miiphy_read(char *devname, u8 phy_adr, u8 reg, u16 *value); +extern int macb_miiphy_write(char *devname, u8 phy_adr, u8 reg, u16 value); + +int board_eth_init(bd_t *bi) +{ + u16 val; + + macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]); + + /* PHY is in power down state initially. + Exit power-down state, write 1 to MICR (0x11) + */ + macb_miiphy_write("macb0", 1, 0x11, 0x01); + + /* Configure LEDs, read and modify PHYCR (0x19) + Left: link, right: activity + */ + macb_miiphy_read("macb0", 1, 0x19, &val); + val |= 1<<5; + macb_miiphy_write("macb0", 1, 0x19, val); + + return 0; +} +#endif + diff --git a/board/indefia/nimbuscloud/u-boot.lds b/board/indefia/nimbuscloud/u-boot.lds new file mode 100644 index 0000000..a7243f2 --- /dev/null +++ b/board/indefia/nimbuscloud/u-boot.lds @@ -0,0 +1,72 @@ +/* -*- Fundamental -*- + * + * Copyright (C) 2005-2006 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32") +OUTPUT_ARCH(avr32) +ENTRY(_start) + +SECTIONS +{ + . = 0; + _text = .; + .text : { + *(.exception.text) + *(.text) + *(.text.*) + } + _etext = .; + + .rodata : { + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } + + . = ALIGN(8); + _data = .; + .data : { + *(.data) + *(.data.*) + } + + . = ALIGN(4); + __u_boot_cmd_start = .; + .u_boot_cmd : { + KEEP(*(.u_boot_cmd)) + } + __u_boot_cmd_end = .; + + . = ALIGN(4); + _got = .; + .got : { + *(.got) + } + _egot = .; + + . = ALIGN(8); + _edata = .; + + .bss : { + *(.bss) + *(.bss.*) + } + . = ALIGN(8); + _end = .; +} diff --git a/include/configs/nimbuscloud.h b/include/configs/nimbuscloud.h new file mode 100644 index 0000000..8c91333 --- /dev/null +++ b/include/configs/nimbuscloud.h @@ -0,0 +1,182 @@ +/* + * Copyright (C) 2008-2009 Indefia + * + * Configuration settings for Indefia Nimbus Cloud + * + * Based on atngw100.h (c) Atmel Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/memory-map.h> + +#define CONFIG_AVR32 1 +#define CONFIG_AT32AP 1 +#define CONFIG_AT32AP7000 1 +#define CONFIG_NIMBUSCLOUD 1 + +#define CONFIG_SYS_HZ 1000 + +/* + * Set up the PLL to run at 180 MHz, the CPU to run at the PLL + * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency + * and the PBA bus to run at 1/4 the PLL frequency. + */ +#define CONFIG_PLL 1 +#define CONFIG_SYS_POWER_MANAGER 1 +#define CONFIG_SYS_OSC0_HZ 25000000 +#define CONFIG_SYS_PLL0_DIV 5 +#define CONFIG_SYS_PLL0_MUL 36 +#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16 +#define CONFIG_SYS_CLKDIV_CPU 0 +#define CONFIG_SYS_CLKDIV_HSB 1 +#define CONFIG_SYS_CLKDIV_PBA 2 +#define CONFIG_SYS_CLKDIV_PBB 1 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CONFIG_SYS_PLL0_OPT 0x05 + +#define CONFIG_USART1 1 + +/* User serviceable stuff */ + +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "console=ttyS0 root=/dev/mtdblock4 rootfstype=jffs2 fbmem=1200k" +#define CONFIG_BOOTCOMMAND \ + "cp.b 0x20000 0x90400000 0x180000; bootm 0x90400000" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_AUTOBOOT 1 +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 +#define CONFIG_NET_MULTI 1 + +/* + * BOOTP/DHCP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC +/* #define CONFIG_CMD_SF */ + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_SOURCE +#undef CONFIG_CMD_XIMG + +#define CONFIG_ATMEL_USART 1 +#define CONFIG_MACB 1 +#define CONFIG_PORTMUX_PIO 1 +#define CONFIG_SYS_NR_PIOS 5 +#define CONFIG_SYS_HSDRAMC 1 +#define CONFIG_MMC 1 +#define CONFIG_ATMEL_MCI 1 +#define CONFIG_ATMEL_SPI 1 + +#define CONFIG_SPI_FLASH 1 +#define CONFIG_SPI_FLASH_ATMEL 1 + +#define CONFIG_SYS_DCACHE_LINESZ 32 +#define CONFIG_SYS_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_FLASH_BASE 0x00000000 +#define CONFIG_SYS_FLASH_SIZE 0x200000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 39 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE +#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE + +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 65536 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + \ + CONFIG_SYS_INTRAM_SIZE) + +#define CONFIG_SYS_MALLOC_LEN (256*1024) +#define CONFIG_SYS_DMA_ALLOC_LEN (16384) + +/* Allow 4MB for the kernel run-time image */ +#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) +#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 + +#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000) + +#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } + +#define CONFIG_CMD_MII 1 +#define CONFIG_MISC_INIT_R 1 +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ +#define CONFIG_DISABLE_CONSOLE 1 /* disable console */ +#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ + + +#endif /* __CONFIG_H */ _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
