On Thu, Feb 22, 2018 at 09:03:05AM +0000, Andre Przywara wrote:
> Hi,
> On 22/02/18 08:05, Jagan Teki wrote:
> > On Thu, Feb 22, 2018 at 7:20 AM, Andre Przywara <andre.przyw...@arm.com> 
> > wrote:
> >> As we are running into issues where the final U-Boot FIT image file is
> >> exceeding our size limit, add a hint to the README.sunxi64 file
> >> to point out the possibility of building non-debug versions of the ATF
> >> binary. This is about 12KB smaller than the standard debug build, and
> >> so again allows successful U-Boot builds for many boards with the
> >> Allwinner H5 SoC.
> >> Please note that under normal circumstances the debug build is still
> >> recommended, as it gives valuable clues in case something goes wrong in
> >> the ATF.
> > 
> > So for H5 we can't able to use debug (:
> Only for the ATF and only as long as we have that size limit, which will
> ideally be lifted with v2018.05-rc1 (or so).
> If you have a better idea, I am all ears.

And I'd expect people that want to enable the debug option to also be
able to figure out what they can remove in the configuration.


Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering

Attachment: signature.asc
Description: PGP signature

U-Boot mailing list

Reply via email to