The kernel size is getting bigger and bigger.  Because the Android
common kernel is even bigger than the vanilla kernel, so images
overlap with the current memory layout.

Change the load address to adjust for a bigger kernel image.

Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---

 include/configs/uniphier.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 9373233..7688234 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -90,7 +90,7 @@
 #define CONFIG_GATEWAYIP               192.168.11.1
 #define CONFIG_NETMASK                 255.255.255.0
 
-#define CONFIG_LOADADDR                        0x84000000
+#define CONFIG_LOADADDR                        0x85000000
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_BOOTM_LEN           (32 << 20)
 
@@ -120,7 +120,7 @@
 #define CONFIG_BOOTFILE                        "fitImage"
 #define LINUXBOOT_ENV_SETTINGS \
        "fit_addr=0x00100000\0" \
-       "fit_addr_r=0x84100000\0" \
+       "fit_addr_r=0x85100000\0" \
        "fit_size=0x00f00000\0" \
        "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
                "bootm $fit_addr\0" \
@@ -133,7 +133,7 @@
 #ifdef CONFIG_ARM64
 #define CONFIG_BOOTFILE                        "Image.gz"
 #define LINUXBOOT_CMD                  "booti"
-#define KERNEL_ADDR_LOAD               "kernel_addr_load=0x84200000\0"
+#define KERNEL_ADDR_LOAD               "kernel_addr_load=0x85200000\0"
 #define KERNEL_ADDR_R                  "kernel_addr_r=0x82080000\0"
 #else
 #define CONFIG_BOOTFILE                        "zImage"
@@ -143,15 +143,15 @@
 #endif
 #define LINUXBOOT_ENV_SETTINGS \
        "fdt_addr=0x00100000\0" \
-       "fdt_addr_r=0x84100000\0" \
+       "fdt_addr_r=0x85100000\0" \
        "fdt_size=0x00008000\0" \
        "kernel_addr=0x00200000\0" \
        KERNEL_ADDR_LOAD \
        KERNEL_ADDR_R \
-       "kernel_size=0x00800000\0" \
-       "ramdisk_addr=0x00a00000\0" \
-       "ramdisk_addr_r=0x84a00000\0" \
-       "ramdisk_size=0x00600000\0" \
+       "kernel_size=0x00e00000\0" \
+       "ramdisk_addr=0x01000000\0" \
+       "ramdisk_addr_r=0x86000000\0" \
+       "ramdisk_size=0x00800000\0" \
        "ramdisk_file=rootfs.cpio.uboot\0" \
        "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
                "if test $kernel_addr_load = $kernel_addr_r; then " \
-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to