On 16.2.2018 14:37, Vipul Kumar wrote: > This series of patch moved i2c u-boot headers to > the Kconfig and enabled in respective defconfig. > > These are the configs: > -CONFIG_SYS_I2C_ZYNQ > -CONFIG_SYS_I2C_ZYNQ_SLAVE > -CONFIG_SYS_I2C_ZYNQ_SPEED > -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET > -CONFIG_ZYNQ_I2C0 > -CONFIG_ZYNQ_I2C1 > > Vipul Kumar (6): > i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ > i2c: Enabled CONFIG_SYS_I2C_ZYNQ in the respective defconfig > i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVE > i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SPEED > i2c: Added Kconfig support for CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET > i2c: Added kconfig support for CONFIG_ZYNQ_I2C0 and CONFIG_ZYNQ_I2C1 > > configs/syzygy_hub_defconfig | 3 +++ > configs/topic_miami_defconfig | 3 +++ > configs/topic_miamilite_defconfig | 3 +++ > configs/topic_miamiplus_defconfig | 3 +++ > configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 4 ++++ > configs/xilinx_zynqmp_zcu102_revA_defconfig | 4 ++++ > configs/xilinx_zynqmp_zcu102_revB_defconfig | 4 ++++ > configs/zynq_zc702_defconfig | 2 ++ > configs/zynq_zc706_defconfig | 2 ++ > configs/zynq_zybo_defconfig | 4 ++++ > drivers/i2c/Kconfig | 30 > +++++++++++++++++++++++++++ > drivers/misc/Kconfig | 6 ++++++ > include/configs/syzygy_hub.h | 2 -- > include/configs/topic_miami.h | 2 -- > include/configs/xilinx_zynqmp.h | 2 -- > include/configs/xilinx_zynqmp_zcu102.h | 4 ---- > include/configs/zynq-common.h | 6 ------ > include/configs/zynq_zc70x.h | 1 - > include/configs/zynq_zybo.h | 3 --- > 19 files changed, 68 insertions(+), 20 deletions(-) >
Applied the whole series with two fixes. Thanks, Michal _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot