Hi all, On Fri, 16 Feb 2018 14:10:25 +0100 Maxime Ripard [email protected] wrote:
> Hi, > > On Thu, Feb 15, 2018 at 06:40:53PM +0100, Giulio Benetti wrote: > > Differently from other Lcd signals, HSYNC and VSYNC signals > > result inverted if their bits are cleared to 0. > > > > Invert their settings of IO_POL register. > > > > Signed-off-by: Giulio Benetti <[email protected]> > > --- > > drivers/video/sunxi/lcdc.c | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/video/sunxi/lcdc.c b/drivers/video/sunxi/lcdc.c > > index 4cb86fb..007057c 100644 > > --- a/drivers/video/sunxi/lcdc.c > > +++ b/drivers/video/sunxi/lcdc.c > > @@ -132,9 +132,9 @@ void lcdc_tcon0_mode_set(struct sunxi_lcdc_reg * const > > lcdc, > > } > > > > val = SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE(dclk_phase); > > - if (mode->flags & DISPLAY_FLAGS_HSYNC_LOW) > > + if (mode->flags & DISPLAY_FLAGS_HSYNC_HIGH) > > val |= SUNXI_LCDC_TCON_HSYNC_MASK; > > - if (mode->flags & DISPLAY_FLAGS_VSYNC_LOW) > > + if (mode->flags & DISPLAY_FLAGS_VSYNC_HIGH) > > val |= SUNXI_LCDC_TCON_VSYNC_MASK; > > > > As we discussed earlier, I'm really not sure this is worth it. This is > going to break all the boards out there that store the modeline in the > environment. And we should fix all the defconfigs (but that's the easy > part). > > Anatolij, any suggestion? from the patch description it is not clear to me which problem this patch tries to solve. AFAICS in the driver code, mode->flags is initialized either from input data in the EDID blob, sync properties in "display-timings" device tree node or from the built-in mode string. I assume the driver already works properly when reading the sync flags from all these sources. It seems this patch can also break boards without modeline in the environment. Can't you adjust sync flags in your CONFIG_VIDEO_LCD_MODE to get the LCD output working without patching the driver? Thanks, Anatolij _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
