On 28.2.2018 10:30, Vipul Kumar wrote: > This patch enabled eeprom related u-boot headers in > the respective defconfig and removed CONFIG_ZYNQ_EEPROM. > > Signed-off-by: Vipul Kumar <[email protected]> > Signed-off-by: Siva Durga Prasad Paladugu <[email protected]> > --- > - Changes in v2: > - Removed CONFIG_ZYNQ_EEPROM for zynqmp. > - Enabled configs defined under CONFIG_ZYNQ_EEPROM for zynq > in defconfig and removed CONFIG_ZYNQ_EEPROM. > - Branch: u-boot-microblaze/kconfig > --- > configs/zynq_zc702_defconfig | 6 ++++++ > configs/zynq_zc706_defconfig | 6 ++++++ > include/configs/xilinx_zynqmp_ep.h | 1 - > include/configs/zynq-common.h | 9 --------- > include/configs/zynq_zc70x.h | 2 -- > 5 files changed, 12 insertions(+), 12 deletions(-) > > diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig > index 8e8b800..2970ef8 100644 > --- a/configs/zynq_zc702_defconfig > +++ b/configs/zynq_zc702_defconfig > @@ -43,6 +43,12 @@ CONFIG_FPGA_ZYNQPL=y > CONFIG_DM_GPIO=y > CONFIG_SYS_I2C_ZYNQ=y > CONFIG_ZYNQ_I2C0=y > +CONFIG_MISC=y > +CONFIG_I2C_EEPROM=y > +CONFIG_SYS_I2C_EEPROM_ADDR=0x54 > +CONFIG_SYS_EEPROM_SIZE=1024 > +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 > +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 > CONFIG_MMC_SDHCI=y > CONFIG_MMC_SDHCI_ZYNQ=y > CONFIG_SPI_FLASH=y > diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig > index 8f83d17..b51567c 100644 > --- a/configs/zynq_zc706_defconfig > +++ b/configs/zynq_zc706_defconfig > @@ -43,6 +43,12 @@ CONFIG_FPGA_ZYNQPL=y > CONFIG_DM_GPIO=y > CONFIG_SYS_I2C_ZYNQ=y > CONFIG_ZYNQ_I2C0=y > +CONFIG_MISC=y > +CONFIG_I2C_EEPROM=y > +CONFIG_SYS_I2C_EEPROM_ADDR=0x54 > +CONFIG_SYS_EEPROM_SIZE=1024 > +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4 > +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 > CONFIG_MMC_SDHCI=y > CONFIG_MMC_SDHCI_ZYNQ=y > CONFIG_SPI_FLASH=y > diff --git a/include/configs/xilinx_zynqmp_ep.h > b/include/configs/xilinx_zynqmp_ep.h > index 3a572b7..6c48e15 100644 > --- a/include/configs/xilinx_zynqmp_ep.h > +++ b/include/configs/xilinx_zynqmp_ep.h > @@ -15,7 +15,6 @@ > > #define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 > #define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ >> 9) > -#define CONFIG_ZYNQ_EEPROM > #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \ > ZYNQMP_USB1_XHCI_BASEADDR} > > diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h > index 0ebb66b..4622d39 100644 > --- a/include/configs/zynq-common.h > +++ b/include/configs/zynq-common.h > @@ -122,15 +122,6 @@ > # define CONFIG_SYS_I2C > #endif > > -/* EEPROM */ > -#ifdef CONFIG_ZYNQ_EEPROM > -# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 > -# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 > -# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 > -# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 > -# define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */ > -#endif > - > /* Total Size of Environment Sector */ > #define CONFIG_ENV_SIZE (128 << 10) > > diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h > index 720f953..715ea80 100644 > --- a/include/configs/zynq_zc70x.h > +++ b/include/configs/zynq_zc70x.h > @@ -10,8 +10,6 @@ > #ifndef __CONFIG_ZYNQ_ZC70X_H > #define __CONFIG_ZYNQ_ZC70X_H > > -#define CONFIG_ZYNQ_EEPROM > - > #include <configs/zynq-common.h> > > #endif /* __CONFIG_ZYNQ_ZC70X_H */ >
Please take a look at this again. I can compile it on zc706. This will require to switch to DM based driver which is not done here too. It means this patch is not complete. Thanks, Michal _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
