Add option to include RESET driver and uclass in SPL.
That can be useful to handle IP reset with same driver
in U-Boot and in SPL.
Signed-off-by: Patrick Delaunay <patrick.delau...@st.com>
---
common/spl/Kconfig | 9 +++++++++
drivers/Makefile | 1 +
2 files changed, 10 insertions(+)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index f58163c..baec39e 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -568,6 +568,15 @@ config SPL_POST_MEM_SUPPORT
performed before booting. This enables the drivers in post/drivers
as part of an SPL build.
+config SPL_RESET_SUPPORT
+ bool "Support reset drivers"
+ depends on SPL
+ help
+ Enable support for reset control in SPL.
+ That can be useful in SPL to handle IP reset in driver, as in U-Boot,
+ by using the generic reset API provided by driver model.
+ This enables the drivers in drivers/reset as part of an SPL build.
+
config SPL_POWER_SUPPORT
bool "Support power drivers"
help
diff --git a/drivers/Makefile b/drivers/Makefile
index e6062a5..9648ebd 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
+obj-$(CONFIG_SPL_RESET_SUPPORT) += reset/
obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
