Hi, On 06/03/18 21:38, Tuomas Tynkkynen wrote: > For some reason we seem to have documented how to build > u-boot-sunxi-with-spl.bin manually with cat but not have a build system > rule for it. Let's fix this to have the file built by default just like > it is on 32-bit sunxi boards.
Ah, thanks a lot! Admittedly I was just too lazy to find out how this works for the 32-bit boards, and how to pull this into the 64 bit builds as well. > Build-tested only. I actually booted from an SD card and it works like a charm! So thanks again for pulling this together. Cheers, Andre. > > Tuomas Tynkkynen (2): > ARM: sunxi: Move u-boot-sunxi-with-spl.bin rule to Makefile > ARM: sunxi: Build u-boot-sunxi-with-spl.bin on ARM64 as well > > Makefile | 10 ++++++++++ > arch/arm/cpu/armv7/sunxi/config.mk | 6 ------ > board/sunxi/README.sunxi64 | 3 +-- > 3 files changed, 11 insertions(+), 8 deletions(-) > delete mode 100644 arch/arm/cpu/armv7/sunxi/config.mk > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot