On 09/03/2018 12:25, Fabio Estevam wrote: > From: Fabio Estevam <fabio.este...@nxp.com> > > Sometimes imximage throws the following error: > > CFGS board/freescale/vf610twr/imximage.cfg.cfgtmp > CFGS board/freescale/vf610twr/imximage.cfg.cfgtmp > MKIMAGE u-boot-dtb.imx > Error: No BOOT_FROM tag in board/freescale/vf610twr/imximage.cfg.cfgtmp > arch/arm/mach-imx/Makefile:100: recipe for target 'u-boot-dtb.imx' failed > > Later on, when running mkimage for the u-boot.imx it will succeed in > finding the IVT offset. > > Looks like some race condition happening during parallel build when > processing mkimage for u-boot-dtb.imx and u-boot.imx. > > A proper fix still needs to be implemented, but as a workaround let's > remove the error when the IVT offset is not found. > > It is useful to have such message, especially during bring-up phase, > but the build error that it causes is severe, so better avoid the > build error for now. > > The error checking can be re-implemented later when we have a proper > fix. > > Reported-by: Breno Lima <breno.l...@nxp.com> > Reported-by: Thomas Petazzoni <thomas.petazz...@bootlin.com> > Signed-off-by: Fabio Estevam <fabio.este...@nxp.com> > --- > Changes since v2: > - Use my NXP address in the From field. > > tools/imximage.c | 5 ----- > 1 file changed, 5 deletions(-) > > diff --git a/tools/imximage.c b/tools/imximage.c > index eb7e682..ed9d935 100644 > --- a/tools/imximage.c > +++ b/tools/imximage.c > @@ -777,11 +777,6 @@ static uint32_t parse_cfg_file(struct imx_header > *imxhdr, char *name) > (*set_dcd_rst)(imxhdr, dcd_len, name, lineno); > fclose(fd); > > - /* Exit if there is no BOOT_FROM field specifying the flash_offset */ > - if (imximage_ivt_offset == FLASH_OFFSET_UNDEFINED) { > - fprintf(stderr, "Error: No BOOT_FROM tag in %s\n", name); > - exit(EXIT_FAILURE); > - } > return dcd_len; > }
As discussed, applied as fix for the release - thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot