From: Anton Gerasimov <tos...@gmail.com>

Delete devices implemented in PL, stylistic changes.

Signed-off-by: Anton Gerasimov <tos...@gmail.com>
---
 arch/arm/dts/zynq-zturn-myir.dts | 64 ++++++++--------------------------------
 1 file changed, 13 insertions(+), 51 deletions(-)

diff --git a/arch/arm/dts/zynq-zturn-myir.dts b/arch/arm/dts/zynq-zturn-myir.dts
index a5ecfcc1d7..b6661d0205 100644
--- a/arch/arm/dts/zynq-zturn-myir.dts
+++ b/arch/arm/dts/zynq-zturn-myir.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Copyright (C) 2015 Andrea Merello <adnrea.mere...@gmail.com>
  *  Copyright (C) 2017 Alexander Graf <ag...@suse.de>
@@ -6,87 +7,49 @@
  *  Copyright (C) 2011 - 2014 Xilinx
  *  Copyright (C) 2012 National Instruments Corp.
  *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
+
 /dts-v1/;
 /include/ "zynq-7000.dtsi"
 
 / {
        model = "Zynq Z-Turn MYIR Board";
-       compatible = "xlnx,zynq-7000";
+       compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
 
        aliases {
                ethernet0 = &gem0;
                serial0 = &uart1;
                serial1 = &uart0;
-               spi0 = &qspi;
-               mmc0 = &sdhci0;
        };
 
-       memory {
+       memory@0 {
                device_type = "memory";
                reg = <0x0 0x40000000>;
        };
 
        chosen {
-               stdout-path = "serial0:115200n8";
+               bootargs = "console=ttyPS0,115200 earlyprintk 
root=/dev/mmcblk0p2 rootwait";
        };
 
        gpio-leds {
                compatible = "gpio-leds";
-               led_r {
-                       label = "led_r";
-                       gpios = <&gpio0 0x72 0x1>;
-                       default-state = "on";
-                       linux,default-trigger = "heartbeat";
-               };
-
-               led_g {
-                       label = "led_g";
-                       gpios = <&gpio0 0x73 0x1>;
-                       default-state = "on";
-                       linux,default-trigger = "heartbeat";
-               };
-
-               led_b {
-                       label = "led_b";
-                       gpios = <&gpio0 0x74 0x1>;
-                       default-state = "on";
-                       linux,default-trigger = "heartbeat";
-               };
-
-               usr_led1 {
-                       label = "usr_led1";
+               usr-led1 {
+                       label = "usr-led1";
                        gpios = <&gpio0 0x0 0x1>;
                        default-state = "off";
-                       linux,default-trigger = "none";
                };
 
-               usr_led2 {
-                       label = "usr_led2";
+               usr-led2 {
+                       label = "usr-led2";
                        gpios = <&gpio0 0x9 0x1>;
                        default-state = "off";
-                       linux,default-trigger = "none";
                };
        };
 
-       gpio-beep {
-               compatible = "gpio-beeper";
-               label = "pl-beep";
-               gpios = <&gpio0 0x75 0x0>;
-       };
-
        gpio-keys {
                compatible = "gpio-keys";
-               #address-cells = <0x1>;
-               #size-cells = <0x0>;
+               #address-cells = <1>;
+               #size-cells = <0>;
                autorepeat;
                K1 {
                        label = "K1";
@@ -100,7 +63,6 @@
 
 &clkc {
        ps-clk-frequency = <33333333>;
-       fclk-enable = <0xf>;
 };
 
 &qspi {
@@ -152,8 +114,8 @@
                reg = <0x49>;
        };
 
-       adxl345@53 {
-               compatible = "adi,adxl34x", "adxl34x";
+       accelerometer@53 {
+               compatible = "adi,adxl345", "adxl345";
                reg = <0x53>;
                interrupt-parent = <&intc>;
                interrupts = <0x0 0x1e 0x4>;
-- 
2.16.2

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to