AT91 Vinco board uses atmel spi driver, enable DM_SPI to
use dm functionality.
Cc: Gregory CLEMENT <gregory.clem...@free-electrons.com>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
arch/arm/mach-at91/Kconfig | 1 +
board/l+g/vinco/vinco.c | 5 +++--
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index b9e6946f72..17d60d0dbe 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -238,6 +238,7 @@ config TARGET_VINCO
select SAMA5D4
select SUPPORT_SPL
select DM
+ select DM_SPI
config TARGET_WB45N
bool "Support Laird WB45N"
diff --git a/board/l+g/vinco/vinco.c b/board/l+g/vinco/vinco.c
index a938a2c2e1..f427abf6c1 100644
--- a/board/l+g/vinco/vinco.c
+++ b/board/l+g/vinco/vinco.c
@@ -33,7 +33,8 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_ATMEL_SPI
+/* FIXME gpio code here need to handle through DM_GPIO */
+#ifndef CONFIG_DM_SPI
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && cs == 0;
@@ -166,7 +167,7 @@ int board_init(void)
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#ifdef CONFIG_ATMEL_SPI
+#ifndef CONFIG_DM_SPI
vinco_spi0_hw_init();
#endif
--
2.14.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
