On Mon, 2018-03-26 at 13:45 +0000, Alexey Brodkin wrote:
> Hi Eugeniy,
> 
> On Mon, 2018-03-26 at 15:57 +0300, Eugeniy Paltsev wrote:
> > HSDK board has sst26wf016 spi flash IC which we want to support.
> > 
> > Add SPI controller, CS-gpio and SPI flash nodes to hsdk device tree.
> > Enable corresponding options in hsdk defconfig.
> > 
> > Signed-off-by: Eugeniy Paltsev <[email protected]>
> 
> IMHO it worth adding a mention about dependency on SST flash patches.
> Also I'd add justification to GPIO addition in defconfig.
> 
> > ---
> >  arch/arc/dts/hsdk.dts  | 26 ++++++++++++++++++++++++++
> >  configs/hsdk_defconfig |  9 +++++++++
> >  2 files changed, 35 insertions(+)
> > 
> > diff --git a/arch/arc/dts/hsdk.dts b/arch/arc/dts/hsdk.dts
> > index 09f3fe9a37..4bb3035d53 100644
> > --- a/arch/arc/dts/hsdk.dts
> > +++ b/arch/arc/dts/hsdk.dts
> > @@ -14,6 +14,7 @@
> >  
> >     aliases {
> >             console = &uart0;
> > +           spi0 = &spi0;
> >     };
> >  
> >     cpu_card {
> > @@ -83,4 +84,29 @@
> >             compatible = "generic-ohci";
> >             reg = <0xf0060000 0x100>;
> >     };
> > +
> > +   spi0: spi@f0020000 {
> > +           compatible = "snps,dw-apb-ssi";
> > +           reg = <0xf0020000 0x1000>;
> > +           #address-cells = <1>;
> > +           #size-cells = <0>;
> > +           spi-max-frequency = <4000000>;
> > +           clocks = <&cgu_clk CLK_SYS_SPI_REF>;
> > +           clock-names = "spi_clk";
> > +           cs-gpio = <&cs_gpio 0>;
> > +           spi_flash@0 {
> > +                   compatible = "spi-flash";
> > +                   reg = <0>;
> > +                   spi-max-frequency = <4000000>;
> > +           };
> > +   };
> > +
> > +   cs_gpio: gpio@f00114B0 {
> 
> Hm "reg" value doesn't match node name: f00114B0 vs f00014B0.
> Which one is correct?

"reg" value is correct.
So node name should be:
------------->8--------------
cs_gpio: gpio@f00014b0 {
------------->8--------------

> > +           compatible = "snps,hsdk-creg-gpio";
> > +           reg = <0xf00014B0 0x4>;
> > +           gpio-controller;
> > +           #gpio-cells = <1>;
> > +           gpio-bank-name = "hsdk-spi-cs";
> > +           gpio-count = <1>;
> > +   };
> >  };
> > diff --git a/configs/hsdk_defconfig b/configs/hsdk_defconfig
> > index c72ee2d0c1..476ce6a974 100644
> > --- a/configs/hsdk_defconfig
> > +++ b/configs/hsdk_defconfig
> > @@ -12,6 +12,8 @@ CONFIG_SYS_PROMPT="hsdk# "
> >  CONFIG_CMD_ENV_FLAGS=y
> >  # CONFIG_CMD_FLASH is not set
> >  CONFIG_CMD_MMC=y
> > +CONFIG_CMD_SF=y
> > +CONFIG_CMD_SPI=y
> >  CONFIG_CMD_USB=y
> >  # CONFIG_CMD_SETEXPR is not set
> >  CONFIG_CMD_DHCP=y
> > @@ -29,12 +31,19 @@ CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
> >  CONFIG_NET_RANDOM_ETHADDR=y
> >  CONFIG_DM=y
> >  CONFIG_CLK_HSDK=y
> > +CONFIG_DM_GPIO=y
> > +CONFIG_HSDK_CREG_GPIO=y
> >  CONFIG_MMC=y
> >  CONFIG_MMC_DW=y
> > +CONFIG_DM_SPI_FLASH=y
> > +CONFIG_SPI_FLASH=y
> > +CONFIG_SPI_FLASH_SST=y
> >  CONFIG_DM_ETH=y
> >  CONFIG_ETH_DESIGNWARE=y
> >  CONFIG_DM_SERIAL=y
> >  CONFIG_SYS_NS16550=y
> > +CONFIG_DM_SPI=y
> > +CONFIG_DESIGNWARE_SPI=y
> >  CONFIG_USB=y
> >  CONFIG_DM_USB=y
> >  CONFIG_USB_EHCI_HCD=y
> 
> -Alexey
-- 
 Eugeniy Paltsev
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot

Reply via email to