Rick Bronson wrote: > Not sure what patches these are or where to find them. Also not > sure what source to apply these patches to. Is it the latest on > denx.de or the ltib sources? Not sure what rev of the processor I > have, my bootup log is here http://www.efn.org/~rick/pub/imx51.log > although I don't see any T01, T02, etc printing.
You do not find at the moment mx51 support on the u-boot mainline. I sent my patches to u-boot ML with the goal to integrate the processor in u-boot and the patches are currently under review. If you want to give theses patches a try, you have to apply them to the current u-boot tree. > > I gues it would be nice if there were some instructions for getting > up to date on the latest u-boot for the iMX51 eval board. I'd be > happy to help put together a set. Your starting point could be looking at http://www.denx.de/wiki/U-Boot/SourceCode. However, as I said, patches for the imx51 eval kit are not yet integrated. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
