Add a driver for the ICS8N3QV01 Quad-Frequency Programmable VCXO.
Signed-off-by: Mario Six <mario....@gdsys.cc>
---
drivers/clk/Kconfig | 8 ++
drivers/clk/Makefile | 1 +
drivers/clk/ics8n3qv01.c | 231 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 240 insertions(+)
create mode 100644 drivers/clk/ics8n3qv01.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c382e8865f..60a6859c24 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -89,4 +89,12 @@ source "drivers/clk/exynos/Kconfig"
source "drivers/clk/at91/Kconfig"
source "drivers/clk/renesas/Kconfig"
+config ICS8N3QV01
+ bool "Enable ICS8N3QV01 VCXO driver"
+ depends on CLK
+ help
+ Support for the ICS8N3QV01 Quad-Frequency VCXO (Voltage-Controlled
+ Crystal Oscillator). The output frequency can be programmed via an
+ I2C interface.
+
endmenu
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index e05c607223..0b4f38527a 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_CLK_STM32MP1) += clk_stm32mp1.o
obj-$(CONFIG_CLK_UNIPHIER) += uniphier/
obj-$(CONFIG_CLK_ZYNQ) += clk_zynq.o
obj-$(CONFIG_CLK_ZYNQMP) += clk_zynqmp.o
+obj-$(CONFIG_ICS8N3QV01) += ics8n3qv01.o
obj-$(CONFIG_MACH_PIC32) += clk_pic32.o
obj-$(CONFIG_SANDBOX) += clk_sandbox.o
obj-$(CONFIG_SANDBOX) += clk_sandbox_test.o
diff --git a/drivers/clk/ics8n3qv01.c b/drivers/clk/ics8n3qv01.c
new file mode 100644
index 0000000000..d7ca63e7e9
--- /dev/null
+++ b/drivers/clk/ics8n3qv01.c
@@ -0,0 +1,231 @@
+/*
+ * (C) Copyright 2017
+ * Mario Six, Guntermann & Drunck GmbH, mario....@gdsys.cc
+ *
+ * based on the gdsys osd driver, which is
+ *
+ * (C) Copyright 2010
+ * Dirk Eibach, Guntermann & Drunck GmbH, eib...@gdsys.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <clk-uclass.h>
+#include <i2c.h>
+
+const long long ICS8N3QV01_FREF = 114285000;
+const long long ICS8N3QV01_FREF_LL = 114285000LL;
+const long long ICS8N3QV01_F_DEFAULT_0 = 156250000LL;
+const long long ICS8N3QV01_F_DEFAULT_1 = 125000000LL;
+const long long ICS8N3QV01_F_DEFAULT_2 = 100000000LL;
+const long long ICS8N3QV01_F_DEFAULT_3 = 25175000LL;
+
+const uint MAX_FREQ_INDEX = 3;
+
+struct ics8n3qv01_priv {
+ ulong rate;
+};
+
+static int ics8n3qv01_get_fout_calc(struct udevice *dev, uint index,
+ uint *fout_calc)
+{
+ u64 n, mint, mfrac;
+ u8 reg_a, reg_b, reg_c, reg_d, reg_f;
+ int val[6];
+ int i;
+
+ if (index > MAX_FREQ_INDEX)
+ return -EINVAL;
+
+ for (i = 0; i <= 5; ++i) {
+ int tmp = dm_i2c_reg_read(dev, 4 * i + index);
+
+ if (tmp < 0) {
+ debug("%s: Error while reading i2c register %d.\n",
+ dev->name, 4 * i + index);
+ return tmp;
+ }
+
+ val[i] = tmp;
+ }
+
+ reg_a = val[0]; /* Register 0 + index */
+ reg_b = val[1]; /* Register 4 + index */
+ reg_c = val[2]; /* Register 8 + index */
+ reg_d = val[3]; /* Register 12 + index */
+ reg_f = val[5]; /* Register 20 + index */
+
+ mint = ((reg_a >> 1) & 0x1f) | (reg_f & 0x20);
+ mfrac = ((reg_a & 0x01) << 17) | (reg_b << 9) | (reg_c << 1)
+ | (reg_d >> 7);
+ n = reg_d & 0x7f;
+
+ *fout_calc = (mint * ICS8N3QV01_FREF_LL
+ + mfrac * ICS8N3QV01_FREF_LL / 262144LL
+ + ICS8N3QV01_FREF_LL / 524288LL
+ + n / 2)
+ / n
+ * 1000000
+ / (1000000 - 100);
+
+ return 0;
+}
+
+static int ics8n3qv01_calc_parameters(uint fout, uint *_mint, uint *_mfrac,
+ uint *_n)
+{
+ uint n, foutiic, fvcoiic, mint;
+ u64 mfrac;
+
+ n = (2215000000U + fout / 2) / fout;
+ if (fout < 417000000U)
+ n = 2 * ((2215000000U / 2 + fout / 2) / fout);
+ else
+ n = (2215000000U + fout / 2) / fout;
+
+
+
+ if ((n & 1) && (n > 5))
+ n -= 1;
+
+ foutiic = fout - (fout / 10000);
+ fvcoiic = foutiic * n;
+
+ mint = fvcoiic / 114285000;
+ if ((mint < 17) || (mint > 63)) {
+ return -EINVAL;
+ }
+
+ mfrac = ((u64)fvcoiic % 114285000LL) * 262144LL
+ / 114285000LL;
+
+ *_mint = mint;
+ *_mfrac = mfrac;
+ *_n = n;
+
+ return 0;
+}
+
+static ulong ics8n3qv01_set_rate(struct clk *clk, ulong fout)
+{
+ struct ics8n3qv01_priv *priv = dev_get_priv(clk->dev);
+ uint n, mint, mfrac;
+ uint fout_calc = 0;
+ u64 fout_prog;
+ long long off_ppm;
+ int res, i;
+ u8 reg[6];
+ int tmp;
+ int addr[] = {0, 4, 8, 12, 18, 20};
+
+ priv->rate = fout;
+
+ res = ics8n3qv01_get_fout_calc(clk->dev, 1, &fout_calc);
+
+ if (res) {
+ debug("%s: Error during output frequency calculation.\n",
+ clk->dev->name);
+ return res;
+ }
+
+ off_ppm = (fout_calc - ICS8N3QV01_F_DEFAULT_1) * 1000000
+ / ICS8N3QV01_F_DEFAULT_1;
+ printf("%s: PLL is off by %lld ppm\n", clk->dev->name, off_ppm);
+ fout_prog = (u64)fout * (u64)fout_calc
+ / ICS8N3QV01_F_DEFAULT_1;
+ res = ics8n3qv01_calc_parameters(fout_prog, &mint, &mfrac, &n);
+
+ if (res) {
+ debug("%s: Cannot determine mint parameter.\n",
+ clk->dev->name);
+ return res;
+ }
+
+ /* Register 0 */
+ tmp = dm_i2c_reg_read(clk->dev, 0) & 0xc0;
+ if (tmp < 0)
+ return tmp;
+ reg[0] = tmp | (mint & 0x1f) << 1;
+ reg[0] |= (mfrac >> 17) & 0x01;
+
+ /* Register 4 */
+ reg[1] = mfrac >> 9;
+
+ /* Register 8 */
+ reg[2] = mfrac >> 1;
+
+ /* Register 12 */
+ reg[3] = mfrac << 7;
+ reg[3] |= n & 0x7f;
+
+ /* Register 18 */
+ tmp = dm_i2c_reg_read(clk->dev, 18) & 0x03;
+ if (tmp < 0)
+ return tmp;
+ reg[4] = tmp | 0x20;
+
+ /* Register 20 */
+ tmp = dm_i2c_reg_read(clk->dev, 20) & 0x1f;
+ if (tmp < 0)
+ return tmp;
+ reg[5] = tmp | (mint & (1 << 5));
+
+ for (i = 0; i <= 5; ++i) {
+ res = dm_i2c_reg_write(clk->dev, addr[i], reg[i]);
+ if (res < 0)
+ return res;
+ }
+
+ return 0;
+}
+
+static int ics8n3qv01_request(struct clk *clock)
+{
+ return 0;
+}
+
+static ulong ics8n3qv01_get_rate(struct clk *clk)
+{
+ struct ics8n3qv01_priv *priv = dev_get_priv(clk->dev);
+
+ return priv->rate;
+}
+
+static int ics8n3qv01_enable(struct clk *clk)
+{
+ return 0;
+}
+
+static int ics8n3qv01_disable(struct clk *clk)
+{
+ return 0;
+}
+
+static const struct clk_ops ics8n3qv01_ops = {
+ .request = ics8n3qv01_request,
+ .get_rate = ics8n3qv01_get_rate,
+ .set_rate = ics8n3qv01_set_rate,
+ .enable = ics8n3qv01_enable,
+ .disable = ics8n3qv01_disable,
+};
+
+static const struct udevice_id ics8n3qv01_ids[] = {
+ { .compatible = "idt,ics8n3qv01" },
+ { /* sentinel */ }
+};
+
+int ics8n3qv01_probe(struct udevice *dev)
+{
+ return 0;
+}
+
+U_BOOT_DRIVER(ics8n3qv01) = {
+ .name = "ics8n3qv01",
+ .id = UCLASS_CLK,
+ .ops = &ics8n3qv01_ops,
+ .of_match = ics8n3qv01_ids,
+ .probe = ics8n3qv01_probe,
+ .priv_auto_alloc_size = sizeof(struct ics8n3qv01_priv),
+};
--
2.16.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
