Hi Bin, On Sun, Apr 1, 2018 at 4:51 PM, Bin Meng <bmeng...@gmail.com> wrote: > > Why I mentioned the 'bootm' command, is that AFAIK the only official > way of booting a VxWorks 7 ARM kernel is to use 'bootm'. Are you > saying that 'bootm' command does not work on your Intel Stratix 10 > DevKit board? If that's the case, we have something to fix. > > Having said that, having 'bootvx' to support booting a 64-bit VxWorks > 7 ARM kernel is a nice to have. Yes, there is the same issue with bootm for ARMv8. It works but only one CPU core is enabled.
>>> >>> > +#if defined(CONFIG_ARM64) && defined(CONFIG_ARMV8_PSCI) >>> > + armv8_setup_psci(); >>> > + smp_kick_all_cpus(); >>> >>> What about ARMv8 32-bit? >> Do you mean ARMv8 32-bit U-Boot or ARMv8 32-bit VxWorks under ARMv8 >> 64-bit U-Boot? >> > > I meant to say ARMv8 32-bit U-Boot. I am not sure if 32-bit U-Boot can > load a 64-bit VxWorks kernel.. Is ARMv8 32-bit U-Boot supported? > > I was trying to understand the reason of modifying this as I believe 'bootm' > should work out of the box. I will submit patch for bootm command in the next email. Kind regards, Vasyl _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot