In the model table for the new revision code encoding documented in
https://www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
add the entries for old models with the new scheme and add CM3 which
only appears in the new scheme.
A device tree for CM3 is not currently upstreamed in linux. When that
happens the name will likely have to be adjusted in the table.
Signed-off-by: Jonathan Gray <j...@jsg.id.au>
---
board/raspberrypi/rpi/rpi.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 279a9c3cda..de8e308f6c 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -91,11 +91,36 @@ static const struct rpi_model rpi_model_unknown = {
};
static const struct rpi_model rpi_models_new_scheme[] = {
+ [0x0] = {
+ "Model A",
+ DTB_DIR "bcm2835-rpi-a.dtb",
+ false,
+ },
+ [0x1] = {
+ "Model B",
+ DTB_DIR "bcm2835-rpi-b.dtb",
+ true,
+ },
+ [0x2] = {
+ "Model A+",
+ DTB_DIR "bcm2835-rpi-a-plus.dtb",
+ false,
+ },
+ [0x3] = {
+ "Model B+",
+ DTB_DIR "bcm2835-rpi-b-plus.dtb",
+ true,
+ },
[0x4] = {
"2 Model B",
DTB_DIR "bcm2836-rpi-2-b.dtb",
true,
},
+ [0x6] = {
+ "Compute Module",
+ DTB_DIR "bcm2835-rpi-cm.dtb",
+ false,
+ },
[0x8] = {
"3 Model B",
DTB_DIR "bcm2837-rpi-3-b.dtb",
@@ -106,6 +131,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
DTB_DIR "bcm2835-rpi-zero.dtb",
false,
},
+ [0xA] = {
+ "Compute Module 3",
+ DTB_DIR "bcm2837-rpi-cm3.dtb",
+ false,
+ },
[0xC] = {
"Zero W",
DTB_DIR "bcm2835-rpi-zero-w.dtb",
--
2.16.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
